目錄:廣東樂善智能裝備股份有限公司>>電液混合EH系列>> SCJ-90EH2X4.15G廠家供應一出四吹瓶機 pvc全自動擠出吹塑機 化工塑料瓶生產電液混合EH系列
| 類別Category | 電液混合EH系列 Hybrid EH series | |||||
| 機型Model | SCJ-90EH2X4.15G | |||||
| 項目 | Items | 單位Unit | 參數Specifications | |||
| 基本參數 Specification | 類別 | Category | / | 單層 1 Layer | ||
制品大容積 | Max. Blow Volume | （L） | 2x4 | |||
| 適用原料 | Material | / | PE\PP | |||
| 模頭坯料數量 | QTY Of Die Head | / | 4 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | （mm） | 180 | |||
| 機器凈重約 | Net Weight | （kg) | 12000 | |||
| 機器外形尺寸 | Machine Dimension | （m，L×H×W） | 6*3.7*4.7 | |||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 9 | ||
| 模頭加熱功率 | Die Head Heating Power | (kW) | 16 | |||
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 2 | ||
| 小合模距 | Min Mold Closing Distance | (mm) | 230 | |||
| 大開模距 | Max Mold Opening Distance | (mm) | 620 | |||
| 鎖模板尺寸 | Mold Plate Size | (mm,W×H) | 750x470 | |||
| 擺架行程 | Carriage Stroke | (mm) | 900 | |||
| 鎖模力 | Clamping Force | （kN) | 197 | |||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | (mm) | 90 | 55 | 25 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | / | 24 | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | (rpm) | 10~66 | 10~48 | 10~21 | |
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 180 | 25 | 4 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 45 | 7.5 | 2.2 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 3 | 2 | |
| 機筒加熱功率 | Barrel Heating Power | (kW) | 15.6 | 6.2 | 1.7 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.76 | 0.08 | / | |
| 動力系統 Power Unit | 擺架電機額定功率 | Carriage Motor Rated Power | (kW) | 5.5 | / | 5.5 |
| 插筆電機額定功率 | Blow Pin Motor Rated Power | (kW) | 3 | / | 3 | |
| 抬頭電機額定功率 | Head Lifing Motor Rated Power | (kW) | 2.2 | |||
| 油泵電機額定功率 | Oil Pump Motor Rated Power | (kW) | 15 | |||
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m3/h | 20 | |||
| 熱切刀功率(選) | Hot Knife Power | (kW) | 2 | |||
| 裝機總功率I | Total Installed Power I | (kW) | 113.52 | |||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/160 | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注2 Remarks | 以上機型均可搭載100點壁厚控制系統，疊加后改變的參數如下 The above model can be equipped with 100-point parison cool system. The parameters to be changed after superposition are as follows. | |||||
| 電動壁厚控制 Servo parison cool | 機型 | SCJ-90EH2X4.15G | ||||
| 壁厚伺服電機額定功率 | Parison Servo Motor Rated Power | kW | 4.5 | |||
| 裝機總功率II | Total Installed Power II | kW | 118.02 | |||
| 鎖模板示意圖 |  | |||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 | ||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||||
3
塑料機械網