目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ-90-65-30U2X1.20F廠家0升油壺吹瓶機 雙工位中空吹塑機 一步法PE吹瓶機U型機系列(直線導軌）
| 類別Category | 直線導軌U系列 Linear guide rail U series | |||||
| 機型Model | SCJ-90-65-30U2X1.20F | |||||
| 項目 | Items | 單位Unit | 參數 | |||
| 基本參數 Specification | 類別 | Category | / | 雙層+液位 2 layers with view stripe | ||
| 制品大容積 | Max. Blow Volume | （L） | 20 | |||
| 適用原料 | Material | / | PE\PP | |||
| 模頭坯料數量 | No.Of Die Head | / | 1 | |||
| 常用模頭中心距 | Die Head distance (cee to cee) | （mm） | / | |||
| 機器凈重約 | Net Weight | （kg) | 17500 | |||
| 機器外形尺寸 | Machine Dimension | （m，L×H×W） | 5×4×3.5 | |||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | ||
| 模頭加熱功率 | Die Head Heating Power | (kW) | 15.6 | |||
| 鎖模架系統 Carriage system | 模架數量 | No.Of Station | / | 2 | ||
| 小合模距 | Min Mold Closing Distance | (mm) | 380 | |||
| 大開模距 | Max Mold Openning Distance | (mm) | 880 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | 480x600 | |||
| 擺架行程 | Carriage Stroke | (mm) | 700 | |||
| 鎖模力 | Clamping Force | （kN) | 196 | |||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diametre | (mm) | 90 | 65 | 30 |
| 螺桿長徑比 | Extruder Length/Diametre Ratio | / | 24 | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | (rpm) | 66 | 10~48 | 10~21 | |
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 160 | 30 | 4 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 37 | 15 | 2.2 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 4 | 2 | |
| 機筒加熱功率 | Barrel Heating Power | (kW) | 15.6 | 7.2 | 2.6 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.72 | 0.12 | / | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | (kW) | 30 | ||
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m3/hr | 19 | |||
| 熱切刀變壓器功率 | Hot Cutter Power | (kW) | 2 | |||
| 裝機總功率I | Total Installed Power I | (kW) | 128.04 | |||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/300 | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | |||||
| 疊加壁厚控制后 After with 100 points parison cool | 機型 | Model | / | SCJ-90-65-30U+S2X1.20F | ||
| 壁厚油泵電機額定功率 | Parison Servo Motor Rated Power | kW | 5.5 | |||
| 裝機總功率II | Total Installed Power II | kW | 133.54 | |||
鎖模板示意圖 Clamping plate |  | |||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 3、耗氣量為設備參考值，實際耗氣量會因設備功能不同存在差異； | ||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||||
3
塑料機械網