目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ-90-30U2X2.15FPE全自動一出二吹瓶機 中空吹塑機 高壓吹瓶機U型機系列(直線導軌）
| 機型 | SCJ-90-30U2X2.15F | ||||
| 項目 | Items | 單位 Units | 參數Specification | ||
| 基本參數 Specification | 類別 | Category | / | 單層+液位線 1layer with view stripe | |
| 制品大容積 | Max. Blow Volume | （L） | 5 | ||
| 適用原料 | Material | / | PE,PP | ||
| 模頭坯料數量 | Qty.Of Die Head | / | 2 | ||
| 常用模頭中心距 | Die Head distance (cee to cee) | （mm） | 250,280 | ||
| 機器凈重約 | Net Weight | （kg) | 15000 | ||
| 機器外形尺寸 | Machine Dimension | （m，L×H×W） | 5.1*3.9*4.1 | ||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | |
| 模頭加熱功率 | Die Head Heating Power | (kW) | 12.5 | ||
| 鎖模架系統 Carriage system | 模架數量 | Qty.Of Station | / | 2 | |
| 小合模距 | Min Clamping Distance Of Mold | mm | 250 | ||
| 大開模距 | Max Clamping Distance Of Mold | mm | 650 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 600X500 | ||
| 擺架行程 | Carriage Stroke | (mm) | 750 | ||
| 鎖模力 | Clamping Force | kN | 196 | ||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diametre | (mm) | 90 | 30 |
| 螺桿長徑比 | Extruder Length/Diametre Ratio | / | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | (rpm) | 10-66 | 10~21 | |
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 160 | 4 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 37 | 2.2 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 2 | |
| 機筒加熱功率 | Barrel Heating Power | (kW) | 17 | 2.6 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.72 | / | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 15 | |
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | ||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | ||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | ||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 15 | ||
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | ||
| 裝機總功率I | Total Installed Power I | kW | 89.02 | ||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/300 | |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | ||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | ||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | ||||
| 疊加壁厚控制后 After with 100points parison cool | 機型 | Model | / | SCJ-90U-30+S2X2.15F | |
| 壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | ||
| 裝機總功率II | Total Installed Power II | kW | 94.52 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | |||
3
塑料機械網