目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ 75-55U22.10F廣東供應塑料瓶生產設備 一出二高速全自動小型吹塑機U型機系列(直線導軌）
| 類別Caterory | U型機系列(直線導軌）/U Series(Linear Guide Way) | ||||
| 機型 | SCJ 75-55U2×2.10F | ||||
| 項目 | Items | 單位 Units | 參數Specification | ||
| 基本參數 Specification | 類別 | Category | / | 雙層 2 layers | |
| 制品大容積 | Max. Blow Volume | L | 5 | ||
| 適用原料 | Material | / | PE,PP | ||
| 模頭坯料數量 | Qty.Of Die Head | / | 2 | ||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 170、200 | ||
| 機器凈重約 | Net Weight | kg | 9500 | ||
| 機器外形尺寸 | Machine Dimension | mm，L×H×W | 4660X2600X3400(2200) | ||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | |
| 模頭加熱功率 | Die Head Heating Power | kW | 12.5 | ||
| 鎖模架系統 Carriage system | 模架數量 | Qty.Of Station | / | 2 | |
| 小合模距 | Min Clamping Distance Of Mold | mm | 230 | ||
| 大開模距 | Max Clamping Distance Of Mold | mm | 620 | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 380×460 | ||
| 擺架行程 | Carriage Stroke | (mm) | 650 | ||
| 鎖模力 | Clamping Force | kN | 127 | ||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 75 | 55 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | 23 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-65 | 20-48 | |
| 大塑化能力 | Max Extrusion Capacity | kg/h | 90/(105) | 25 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | kW | 22/(30) | 7.5 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 3 | 3 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 10 | 6.2 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.3 | 0.08 | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 15 | |
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | ||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | ||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | ||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 15 | ||
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | ||
| 裝機總功率I | Total Installed Power I | kW | 75.58/(83.58) | ||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/260 | |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | ||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | ||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 50 points parison cool system,parameters would be changed as below: | ||||
| 疊加壁厚控制后 After with 100 points parison cool | 機型 | Model | / | SCJ 75-55U+S2×2.10F | |
| 壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | ||
| 裝機總功率II | Total Installed Power II | kW | 81.08/(89.08) | ||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | |||
 | |||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 | |||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | |||||
3
塑料機械網