目錄:廣東樂善智能裝備股份有限公司>>吹瓶機K型機系列>> SCJ 75K2×1.10D廠家供應7L機油潤滑油原料桶制瓶機 HDPE塑料瓶吹塑機 吹瓶機K型吹瓶機
| 類別Category | K型機系列(4導柱型）/K Series(4 Tie Bar) | |||
| 機型 Model | SCJ 75K2×1.10D | |||
| 項目 | Items | 單位 Units | 參數Specification | |
| 基本參數 Specification | 類別 | Category | / | 單層 1layer |
| 制品大容積 | Max. Blow Volume | L | 7 | |
| 適用原料 | Material | / | PE,PP | |
| 模頭坯料數量 | QTY Of Die Head | / | 1 | |
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | / | |
| 機器凈重約 | Net Weight | kg | 6300 | |
| 機器外形尺寸 | Machine Dimension | mm L×H×W | 3930X2500X2200 | |
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 2 |
| 模頭加熱功率 | Die Head Heating Power | kW | 9.5 | |
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 2 |
| 小合模距 | Min Mold Closing Distance | mm | 230 | |
| 大開模距 | Max Mold Openning Distance | mm | 580 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W380×H460 | |
| 擺架行程 | Carriage Stroke | (mm) | 500 | |
| 鎖模力 | Clamping Force | kN | 100 | |
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 75 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-63/（20-78） | |
| 大塑化能力 | Max Extrusion Capacity | kg/h | 95/(105) | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 22/(30) | |
| 機筒加熱段數 | Barrel Heating Zone | / | 3 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 10 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.3 | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 11 |
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 14 | |
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 15 | |
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |
| 裝機總功率I | Total Installed Power | kW | 54.8/(62.8) | |
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/200L |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 8 | |
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |
| 備注/Remarks： | 以上機型 Model均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison cool systemmparameters would be changed as below: | |||
| 疊加壁厚控制后 After with 100 points parison cool | 機型 Model | Model | / | SCJ 75K+S2×1.10D |
| 壁厚油泵電機額定功率 | Parison Servo Motor Rated Power | kW | 5.5 | |
| 裝機總功率II | Total Installed Power | kW | 60.3/(68.3) | |
| 鎖模板示意圖 Clamping plate | ||||
 | ||||
| 備注： 1、各機型的加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況。 2、本參數表僅供參考，實際機型參數可能會有所調整。 | ||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||
3
塑料機械網