低溫脆性沖擊試驗機儀器標準：
本儀器是根據GB1682GJ標準設計的，各項技術指標符合HG 2-162-1965塑料低溫沖擊壓縮試驗方法和GB5470-2008 塑料沖擊脆化溫度試驗方法等GJ標準的要求。
 

低溫脆性沖擊試驗機結構原理
A、本設備由制冷壓縮機主機體、加熱裝置、電子控制箱、冷卻槽、冷卻介質循環系統、自動報警裝置等部分組成。啟動制冷開關后，壓縮機開始工作，制冷系統進入正式工作狀態。制冷壓縮機連續不斷的工作，當接近設定溫度時，冷卻槽中的加熱裝置開始按比例提供熱量，用以平衡制冷系統產生的多余冷量，以達到恒溫的目的。攪拌可使冷卻槽內的冷卻介質不斷循環，使溫度均勻一致。
B、試樣夾持器
試樣一邊夾持4個試樣（橡膠類），另一邊夾持15個試樣（塑料類）。
C、沖擊裝置
沖擊裝置由沖機錘和自鎖機構組成。
D、沖擊器
沖擊頭半徑為1.6±0.1mm；
沖擊時，沖擊頭和試樣夾持器之間間隙為6.4±0.3mm；
沖擊頭的中心線與試樣夾持器之間的距離為8±0.3mm。
system enters the formal  state. The refrigeration compressor works continuously. When it is close to the set temperature, the heating device in the cooling tank begins to provide heat in proportion to balance the extra cooling produced by the refrigeration system, so as to achieve the purpose of constant temperature. Mixing can make the cooling medium in the cooling tank circulate continuously and make the temperature uniform.

技術參數:
1.控溫范圍：室溫 -70℃（室溫≤25℃）
2.恒溫精度：±0.3℃      
3.降溫速度：0℃～﹣30℃    約2.5℃/min
﹣30℃～﹣40℃   約2.5℃/min
﹣40℃～﹣70℃   約2.0℃/min
4.大外形尺寸：900×500×800mm（長×寬×高）
5.工作室有效工作空間：280×170×120mm（長×寬×高）   
6.可裝試樣數量：1
7.數字計時器數字計時器：0秒 -99分鐘，分辨率1秒
8.冷卻介質：乙醇或其他不凍液
9.攪拌電機：8W
10.工作電源：220V--240V，50Hz，1.5kW
11.工作溫度:≤25℃
 

特點及用途:
低溫脆性試驗機是測定材料在規定條件下試樣受沖擊出現破壞時的zui高溫度，即為脆性溫度，可以對塑料及其他彈性材料在低溫條件下的使用性能作比較性鑒定。可以測定不同橡膠材料或不同配方的硫化橡膠的脆性溫度和低溫性能的優劣。因此無論在科學研究材料及其制品的質量檢驗，生產過程的控制等方面均是*的。

北京北廣精儀主營產品：*材料試驗機（拉力機）、電壓擊穿試驗儀、體積表面積電阻率測試儀、介電常數與介質損耗測試儀、耐電弧性能試驗儀、高壓漏電起痕試驗儀、環境試驗箱、維卡熱變形試驗儀、轉子硫化儀、熔體流動速率儀、水平垂直燃燒試驗儀、門尼粘度試驗儀、阿克隆磨耗試驗機、氣動沖片機、手動沖片機、滑動摩擦磨損試驗機、啞鈴制樣機、簡支梁沖擊試驗機、懸臂梁沖擊試驗機、氧指數測定儀、水分測定儀、海綿密度測定儀、橡膠回彈儀等

售后內容：
我公司派工程師負責安裝調試及培訓。

產品自客戶驗收之日起，免費保修1年，終身維修。

1、設備安裝調試：
免費為用戶提供所購儀器的安裝調試服務。在進行安裝調試前用戶方應提供相應的準備工作，并予以提前通知，具體安裝調試日期雙方可以協商而定。設備安裝調試由多年行業*工程師免費進行。保證用戶可以正確使用、軟件操作和一般維護以及應及故障的處理。

2、培  訓：
我公司工程師免費為用戶提供操作人員培訓，直到操作人員能獨立操作為止。

3、設備驗收標準：
用戶方按訂貨技術要求進行驗收。并符合GJ標準要求。設備驗收在用戶方進行并由我公司安裝調試技術人員和用戶共同在維修報告上簽字以確認儀器的調試工作完成。

4、設備維修服務：
我公司產品自用戶現場調試驗收合格后1年內免費保修，終身維護。在1年免費保修期內產品發生非人為質量問題，我公司為客戶提供免費維修。如產品在免費保修期外出現故障，維修服務只適當收取材料成本費。

5、技術zhi持：
對于所需儀器的用戶，根據用戶的要求提供專業的技術方案。除了常規的儀器服務外，我公司技術部還可為用戶提供各種非常規設備的技術zhi持。

6、售后響應：
在接到用戶維修邀請后，2小時內做出反應，并給予解決。如未解決，我公司指派工程師及時到達用戶現場，解決問題至設備正常使用為止。

After-sale service
After sales content:
Our company sends engineers to be responsible for installation, debugging and training.
Products from the date of customer acceptance, free warranty for 2 years, life-long maintenance.
1. Equipment installation and commissioning:
Provide free installation and debugging services for users. Before installation and commissioning, the user shall provide corresponding preparations and give advance notice. The specific installation and commissioning date can be determined by both parties through consultation. The equipment installation and debugging are carried out by senior engineers for many years free of charge. Ensure that the user can use the software correctly, operate and maintain the software, and deal with the faults.
2. Training:
Our company's engineers provide free operator training for users until the operators can operate independently.
3. Equipment acceptance standard:
The user shall conduct acceptance according to the order technical requirements. And meet the requirements of national standards. The equipment acceptance shall be conducted by the user side, and the installation and commissioning technicians of our company and the user shall jointly sign the maintenance report to confirm the completion of the instrument commissioning.
4. Equipment maintenance service:
Our company's products are free of charge for warranty and lifetime maintenance within 2 years after the user's on-site commissioning and acceptance. During the 2-year free warranty period, our company provides free maintenance for customers in case of non-human quality problems. If the product breaks down outside the free warranty period, the maintenance service will only charge the material cost properly.
5. Technical support:
For the users of required instruments, professional technical solutions shall be provided according to the requirements of users. In addition to conventional instrument services, our company's technical department can also provide users with technical support for various unconventional equipment.
6. After sales response:
After receiving the user's maintenance invitation, respond within 2 hours and solve it. If it is not solved, our company will assign engineers to arrive at the user's site in time to solve the problem until the equipment is in normal use.

橡膠低溫脆性試驗機 低溫脆性試驗機 塑料低溫脆性試驗機 低溫脆性實驗 橡膠低溫脆性試驗機
揚州低溫脆性試驗機 橡膠低溫性能試驗機 硫化橡膠脆性測定儀 低溫脆性 橡塑低溫脆性試驗機 塑料沖擊脆化溫度測定儀
橡膠低溫沖擊脆性測定儀 低溫脆性溫度測定儀 -70°橡膠低溫脆化試驗機 塑料脆化溫度試驗機 單試樣法橡膠低溫沖擊試驗機 橡膠低溫脆性測定儀