用途：
該設備根據客戶需求可生產，厚度為0.3mm~12mm ，寬幅50mm~2500mm各類板、片材。
Technology Characteristics:
The equipment can produce all kinds of platesheet materials whose thickness is 0.3mm -12mm,
width is 50mm- 2500mm.

性能及特點：
螺桿采用特殊混料功能及高塑化能力設計，為使塑料融化，色澤均勻擠出量增高。
衣架型模頭采用特殊雙節流設計，使板材厚薄調整更為精準。
溫度控制±1℃可精確控制塑化過程及板材厚薄，平整性。
輥成型壓棍機采用水平式或垂直式，可自由升降方式在厚板薄板操作過程中提供更多選擇性，提高板材品質。
板材厚薄控制采用螺桿調整及油壓壓輪雙向調整可精確控制板材厚薄度。
壓棍輪直徑為350mm及雙回路冷卻系統，配合模溫控制機精確控制壓棍輪溫度使板材，厚薄均勻。

Application&Features:
The screw was designed special mixed materialhigh plastic so that it flux plastic,colorluster equality,output
heighten.
Clothes rach model DIEwas designed special double throttle,it adjusts thickness of sheet exactly.
Temperature control±1℃,it can exactitude control the course of plasticthicknessunknit of sheet.
Moulding unit adopt horizontalvertical,it provide more choice in the operate course of thick sheet metal by fluctuation at
libertyincrease quality of sheet.
Adjusting thickness of sheet by screwoil pressure pressing wheel double direction so as to achieve thickness exactly.
Pressing wheel diameter 350mmdouble loop cooling system,concert die temperature controller exactly control pressing
wheel temperature so as to achieve unknitthickness equally.