注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
張家港市中南化工機械有限公司
張家港市中南化工機械有限公司
暫無信息 |
1.轉鼓、螺旋等主要零件采用優質耐蝕不銹鋼、鈦合金等材料制造。
型號 | 轉鼓直徑mm | 轉鼓轉速r/min | 分離因數 | 生產能力m3/h | 主電機功率kw | 機器重量kg | 外形尺寸（長寬高）mm |
LLW320 | 320 | 2630 | 1240 | 0.5~3 | 7.5 | 700 | 1350*1050*1000 |
LLW350 | 350 | 3000 | 1770 | 1~5 | 11 | 1200 | 1520*1140*1080 |
LLW450 | 450 | 2500 | 1580 | 2~8 | 22 | 1700 | 1640*1380*1190 |
LLW530 | 530 | 2000 | 1190 | 3~10 | 30 | 2500 | 1680*1390*1340 |
LLW630 | 630 | 1800 | 1140 | 5~15 | 37 | 3500 | 2110*1560*1650 |
LLW800 | 800 | 1400 | 870 | 8~20 | 55 | 4000 | 2300*2200*1750 |
LLW1000 | 1000 | 900 | 445 | 10~50 | 75 | 6200 | 3200*2155*2280 |
1.轉鼓、螺旋等主要零件采用優質耐蝕不銹鋼、鈦合金等材料制造。
2.轉鼓角度按工藝條件10°、20°可選。
3.專用過濾金屬板網（厚度0.4~ 0.5mm）或梯形絲成型網（厚度4.5~ 5mm）可選。
4.變頻控制，轉鼓轉速無級調速。
5.進料、分離、洗滌、脫水、推料連續完成，處理量大。
6.獨立的潤滑系統，潤滑方式簡單可靠，冷卻效果好。
7.安全保護：可配置轉速檢測，過振動保護，電機過載過熱保護。8.對于大粘度物料，可選用液壓差速器，工作穩定可靠。
1. Rotary drum, screw and other main parts are made of high-quality corrosion-resistant stainless steel, titanium alloy and other materials.
2. The drum Angle according to the process conditions of 10 ° 20 °, optional.
3. Special filter metal plate mesh (thickness 0.4~ 0.5mm) or trapezoidal wire shaped mesh (thickness 4.5~ 5mm) is optional.
4. Frequency conversion control, stepless speed regulation of drum speed.
5. Feeding, separation, washing, dehydration and pushing are completed continuously with large processing capacity.
6. Independent lubrication system, simple and reliable lubrication, good cooling effect.
7. Safety protection: speed detection, over-vibration protection and motor overload and overheating protection can be configured.8. For materials with high viscosity, hydraulic differential can be selected for stable and reliable operation.
LLW型臥式螺旋卸料過濾式離心機是種能耗低、性能穩定、分離效果好的機型。分離過程中的進料、脫水、洗滌、卸料等工序連續完成，生產效率和自動化程度高，是種的固液分離設備。
懸浮液從進料管進入螺旋內腔，并通過螺旋小頭接近錐端底部的噴料口進入轉鼓，在離心力場的作用下，料漿中的液相通過鋪設在轉壁上的篩網被過濾出去，固相顆粒則被截留在轉鼓內；同時，轉鼓內的固相顆粒在離心力和螺旋與轉鼓之間的相對差速作用下，從轉鼓小端向轉鼓大端運動，在此運動過程中，由于回轉直徑的加大，離心力得到快速遞增，固相從初始進入時的較高含濕量到排出轉鼓時達到含濕量固相，從而實現固液相自動、連續的分離。
離心機內置洗滌管，可在濾餅過濾的同時對濾餅進行洗滌。由于是薄層濾餅洗滌，洗滌效果好，洗滌液消耗低。在轉鼓背面可設計蒸汽管，對轉鼓背面結晶的物料進行高溫洗滌。 螺旋差速器有擺線差速器，行星差速器和液壓差速器三種配置，滿足不同物料的分離。
LLW horizontal spiral discharge filtration centrifuge is a type with low energy consumption, stable performance and good separation effect.It is an advanced solid-liquid separation equipment with high production efficiency and automation.
The suspension enters the spiral inner chamber from the feeding tube and enters the drum through the nozzle near the bottom of the cone end. Under the action of the centrifugal force field, the liquid phase in the slurry is filtered out through the screen laid on the rotating wall, and the solid phase particles are trapped in the drum.At the same time, the drum of solid phased particles in centrifugal force and the screw and the relative differential between the drum, the drum to drum heel movement, in the process of the movement, because of the turning diameter increased, increasing centrifugal force to get fast, solid phase from the initial into the higher moisture content to discharge drum reached the minimum moisture content solid phase, so as to realize the separation of solid and liquid automatic, continuous.
The centrifuge has built-in washing tube, which can wash the filter cake while filtering it.Since it is a thin layer filter cake washing, the washing effect is good and the detergent consumption is low.The steam pipe can be designed on the back of the drum, and the crystallized material on the back of the drum can be washed at high temperature.Screw differential has three kinds of configuration, cycloid differential, planetary differential and hydraulic differential, which can meet the separation of different materials.
LLW臥式螺旋卸料過濾式離心機廣泛應用于化工、食品、鹽、采礦、制藥等行業。
因其分離原理和結構特性，其對物料的針對性也較強，主要適用于具有較大顆粒度、對顆粒破碎沒有嚴格要求的物料。在選型時應進行物料分析和相應的試驗，以確定其適用和分離性能。
LLW horizontal spiral discharge filtration centrifuge is widely used in chemical, food, salt, mining, pharmaceutical and other industries.
Due to its separation principle and structural characteristics, it is also more targeted to the material, mainly suitable for materials with larger particle size, no strict requirements for particle breakage.Material analysis and corresponding tests should be carried out to determine its applicability and separation performance.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
