注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
深圳市文惠機械設備有限公司
深圳市文惠機械設備有限公司
箱型水冷式冷水機
產品簡介 Introduction
◆箱型水冷式冷水機性能穩定：3HP→7HP為單組壓縮機，從8HP及以上機型大多采用兩臺或多臺壓縮機并聯使用：每臺壓縮機自帶一個獨立的制冷系統，含蒸發器及冷凝器也獨立，所有壓縮機由統一的控制系統指揮，可實現單系統開機，
關機與運行功能。該機型均采用原裝材料制作，單機故障率極低，該機型具備高度穩定的性能，可作為長年連續運行工作需求選。
◆該機型采用殼管式冷凝器，在使用一定時間內，發現壓縮機高壓表壓力偏高時，方便拆蓋維護及保養。
◆箱型水冷式冷水機安裝時必須要有冷卻水塔或其它冷水源與散熱循環水泵方可使用，如不具備該條件請選擇我司另一款冷水機：箱型風冷式冷水機。
◆The box-type water-cooled chiller has stable performance: 3HP→7HP is a single setof compressors. Most models from 8HP and above use two or more compressors inparallel: each compressor comes with an independent refrigeration system, includingevaporation The condenser and condenser are also completely independent, and allcompressors are commanded by a unified control system, which can realize thefunctions of single system startup, shutdown and operation. This model is made oforiginal genuine materials, and the failure rate of a single machine is extremely low.This model has a highly stable performance and can be used as the first choice forlong-term continuous operation.
◆This model uses a shell and tube condenser. It is convenient to remove the cover formaintenance and repair when the pressure of the compressor high pressure gauge isfound to be high during a certain period of use.
◆The box-type water-cooled chiller must be installed with a cooling water tower orother cold water source and a heat-dissipating circulating water pump before it canbe used. If this condition is not met, please choose another chiller from ourcompany: box-type air-cooled chiller.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
