注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
四川川大干燥科技工程有限責任公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地成都市
塑料機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-07-27 09:18:19瀏覽次數:180次
聯系我時,請告知來自 塑料機械網暫無信息 |
一、工作原理及應用范圍介紹IntroductionofWorkingPrincipleandScopeofApplication設備呈臥式圓筒形,圓筒體為夾套通熱結構,圓筒內有通熱的特殊攪拌機構
一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application
設備呈臥式圓筒形,圓筒體為夾套通熱結構,圓筒內有通熱的特殊攪拌機構。物料在筒體內受到來至筒體夾套加熱與內部的攪拌器雙重加熱的同時,還處于動態與真空狀態下進行蒸發、結晶、烘干于一體一次完成或單獨在動態下進行蒸發濃縮,動態下進行結晶、動態下進行烘干。廣泛應用于廣泛應用于醫藥、食品、化工、生物工程、冶金粉末、環保等物料,在真空干凈環境下強制低溫脫水。
The equipment is shaped as a horizontal cylinder which has a jacketed thermal structure. There is a special patented thermal stirring mechanism inside the cylinder. When heated by the cylinder jacket in the cylinder and by the internal stirrer, material will be evaporated, crystallized and dried simultaneously under vacuum condition in the dynamic status, or be separately evaporated and concentrated in the dynamic status and then crystallized and dried in the dynamic status. It is widely applied to force pharmaceuticals, food, chemical engineering, bioengineering, metallurgical powder and environmental materials to be dehydrated at low temperature in the vacuum clean environment.
二、特點Characteristics
1. 設備呈臥式結構不占空間且方便進、出料及設備清洗。
2. 設備除了外殼體夾套加熱外,內部攪拌動態槳葉及攪拌軸均為加熱部件,比一般夾套烘干設備工作效率提高15%~30%。
3. 物料在動態以及真空狀態下進行烘干,其產品干燥均勻,流動性好,能限度保持色、香、味等。
4. 攪拌器的設計結構,用于保障物料動態均勻分散同時不偏移堆積于某一處以保證所有物料均勻受熱。
5. 根據工況及用戶需求可實現全程自動化、智能化控制。
1. The equipment is shaped as a horizontal structure which takes up very little space and facilitates material feeding and discharging and equipment cleaning.
2. Besides heating of the outer shell jacket, both the internal stirring dynamic blade and agitating shaft of the equipment are heating elements, so the work efficiency of the equipment is 15%~30% higher than that of general jacketed drying equipment.
3. The material is dried in the dynamic and vacuum status. Its products are dried uniformly with good mobility and can maintain the color, fragrance and flavor etc to the greatest extent.
4. The unique patented design structure of the stirrer can ensure the material won’t shift and heap up at some place when dispersing uniformly in the dynamic status so that all the materials can be heated uniformly.
5. According to the working condition and users’ requirements, the whole process can be controlled automatically and intelligently.
三、技術參數(下表中數值僅供選型時參考)
Technical parameters (the values in the table below are for reference in type selection only)
四、工藝流程圖Process flow diagram
內熱螺旋攪拌真空干燥機
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
四川川大干燥科技工程有限責任公司