高溫連續動態煅燒
一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application
需煅燒(聚合)的物料經螺旋加料機均勻進入回轉圓筒一端,物料在回轉圓筒內設抄板抄動下做動態連續高溫煅燒(聚合),達到要求后從出料端出料。適用于各種礦物煅燒、分解,化工聚合,高溫?zé)Y(jié),物質轉化等工藝需求,如:稀土、鈦白粉、各種礦物、磷化工等。
The materials to be calcined (polymerized) are fed in one end of the rotary drum by a self-conveyor feed, calcined (polymerized) dynamically and continuously at a high temperature under the action of shoveling plate set in the rotary drum, and discharged from the discharge end after meeting the requirement. This equipment is applicable to calcination, decomposition, chemical polymerization, high-temperature sintering and materials conversion of various minerals, such as rare earth, titanium dioxide, various minerals and phoschemical industry.
二、特點Characteristics
1.煅燒是在動態下進行,保證物料煅燒穩定、溫度均勻。
2.物料系在連續動態下進行,工藝路線連續、流水化生產,產能可大可小。
3.煅燒加熱方式可分為外熱式、內熱式、內外同時加熱式。方便、靈活。
1. The calcination is processed in a dynamic status to ensure the stable calcination and even temperature of materials.
2. The material system is operated under continuous dynamic status with continuousprocess route, streamline production and flexible production capacity.
3. The heating mode of calcination is convenient and flexible, including external heating, internal heating and internal & external concurrent heating.
三、技術參數(下表中數值僅供選型時參考)
Technical parameters (the values in the table below are for reference in type selection only)
四、結構簡圖Dimension sketch