目錄:廣東樂善智能裝備股份有限公司>>全電吹瓶機>> S1-450+01-90+75-1樂善30L全自動吹塑機 塑料瓶生產機器全電吹瓶機系列
| 類別Category | 先普系列全電動Samp Type Series Full-Electric | ||||
| 機型Model | S1-450+01-90+75-1 | ||||
| 項目 | Items | 單位Unit | 參數 | ||
| 基本參數 Specification | 類別 | Category | / | 直線導軌Linear Guide Way | |
| 制品大容積 | Max. Blow Volume | L | 30 | ||
| 適用原料 | Material | / | HDPE,PP | ||
| 模頭坯料數量 | QTY Of Die Head | / | 1 | ||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | / | ||
| 機器凈重約 | Net Weight | kg | 約18000 | ||
| 機器外形尺寸 | Machine Dimension | mm，L×H×W | 約5.37*5.39*4.4 | ||
| 模頭 Die head | 模頭加熱段數 | Die Head Heating Zone | / | 3 | |
| 模頭加熱功率 | Die Head Heating Power | kW | 13.8 | ||
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 1 | |
| 小合模距 | Min Mold Closing Distance | mm | 500 | ||
| 大開模距 | Max Mold Openning Distance | mm | 950 | ||
| 鎖模板尺寸 | Mold Plate Size | mm W×H | 600x700 | ||
| 擺架行程 | Carriage Stroke | (mm) | 900 | ||
| 鎖模力 | Clamping Force | kN | 280 | ||
| 擠出系統 Extruder system | 螺桿直徑 | Extruder Diameter | mm | 90 | 75 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 66 | 20~78 | |
| 大塑化能力 | Max Extrusion Capacity | kg/h | 160 | 90 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | kW | 37 | 22 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 3 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 17 | 9 | |
| 動力系統 Power system | 插筆電機額定功率 | Blow Pin Motor Rated Power | kW | 3 | / |
| 鎖模電機額定功率 | Mold clamping Motor Rated Power | kW | 11 | / | |
| 擺架電機額定功率 | Carriage Motor Rated Power | kW | 7.5 | / | |
| 抬頭電機額定功率 | Head Lifing Motor Rated Power | kW | 2.2 | ||
| 平臺升降電機額定功率 | Platform Lifing Motor Rated Power | kW | 1.5 | ||
潤滑油泵電機額定功率 | Rated power of lubricating oil pump motor | KW | / | ||
氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | ||
水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | ||
耗氣量 | Air Consumption | m³/h | 28 | ||
| 熱切刀變壓器功率 | Hot Knife Transformer Power | kW | 2 | ||
裝機總功率I | Total Installed Power I | kW | 126 | ||
| 備注1 Note 1 | 以上機型均可搭載100點壁厚控制系統，疊加后改變的參數如下 The above models can be equipped with 100-point parison cool system. The parameters to be changed after superposition are as follows. | ||||
| 電動壁厚控制 Servo parison cool | 機型 | Model | / | S1-450+01-90+75-1 | |
| 壁厚伺服電機額定功率 | Parison Servo Motor Rated Power | kW | 7.5 | ||
| 裝機總功率II | Total Installed Power II | kW | 133.5 | ||
| 備注2 Note 2 | 以上機型均可搭載后置機械手，疊加后改變的參數如下 The above models can be equipped with robot hand. The parameters to be changed after superimposition are as follows. | ||||
機械型 | Model | / | S1-450+01-90+75-1 | ||
| 主軸電機額定功率 | Spindle Motor Rated Power | kW | 1.5 | ||
| Y軸電機額定功率 | Y-axis Motor Rated Power | kW | 0.75 | ||
| 裝機總功率III | Total Installed Power III | KW | 135.75 | ||
| 鎖模板示意圖 Clamping plate |  | ||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 | |||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | |||||
3
塑料機械網