塑料機械網
詳細介紹
產品參數
| 項目 | DESCRIPTION | UNIT | BL260HS | ||
| 標準規格 | International specification | 965/2600 | |||
| 螺桿直徑 | Screw diameter | A | B | C | |
| mm | 45 | 50 | 55 | ||
| 螺桿長徑比 | Screw ratio | 22.5 | 20 | 18 | |
| 理論注射容積 | Theoretical injection capacity | cm3 | 400 | 490 | 600 |
| 注射量 (以PS計) | Shot weight(PS) | g | 370 | 455 | 550 |
| oz | 12.9 | 15.9 | 19.3 | ||
| zui大注射速度 | Injection piston speed | mm/s | 300 | ||
| 注射速率 | Injection rate | g/s | 439 | 542 | 656 |
| 注射壓力 | Injection pressure | Mpa | 242 | 196 | 162 |
| 射膠行程 | Injection stroke | mm | 250 | ||
| zui大螺桿轉速 | Max. Screw speed | r/min | 300 | ||
| 鎖模力 | Clamping force | Ton | 265 | ||
| kN | 2600 | ||||
| 開模行程 | Opening stroke | mm | 580 | ||
| 拉桿內間距 | Space between tie bar | mm×mm | 660×610 | ||
| zui小模具厚度 | Min. mould height | mm | 220 | ||
| zui大模具厚度 | Max. mould height | mm | 600 | ||
| zui大模板距離 | Max. distance Platen | mm | 1180 | ||
| 頂出行程 | Ejector stroke | mm | 180 | ||
| 頂出力 | Ejector force forward | kN | 62 | ||
| 頂針回縮力 | Ejector force back | kN | 41 | ||
| 頂出桿數 | Number of ejector bar | PC | 13 | ||
| 系統壓力 | Sys. Pressure | MPa | 16 | ||
| 電機功率 | Pump Motor | kW | 30 | ||
| 電熱功率 | Heater power | kW | 13 | ||
| 溫控區數 | Number of temp. zones | 3+1 | |||
| 油箱容量 | Oil tank capacity | L | 280 | ||
| 機械外形尺寸 | Machine dimensions(L×W×H) | m×m×m | 5.8×1.35×2 | ||
| 機器重量 | Machine weight | Ton | 7.2 | ||
塑料機械網