 |
盛業塑膠原料有限公司
主營產品： 工程塑料，通用塑料，熱塑性彈性體 |
會員1.png)
|
盛業塑膠原料有限公司
主營產品： 工程塑料，通用塑料，熱塑性彈性體 |
暫無信息 |
| 參考價 | 面議 |
塑料機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2018-05-15 17:41:41瀏覽次數：271
聯系我們時請說明是塑料機械網上看到的信息，謝謝!
我公司銷售的材料均為*材料，咨詢采購！ 吳生 186 6517 6937
皺紋:
皺紋可能出現模制產品表面的厚壁或厚恭敬的,由力線像焊線前面描述的。但皺紋線條表現為自由曲線,盡管幾乎直線焊線。皺紋是由re-conjunction樹脂噴射后的模具。下面的預防措施是有效的。
(1)設置氣缸溫度更高。
(2)設置模具溫度更高。
(3)設置注入速度慢。
(4)改變門的位置。
(5)調整澆口厚度與模制產品近的那部分產品的厚度。
Wrinkle：
Wrinkle may appear on the surface of molded product with thick wall or having thick deferential, which consists of slightly dint lines like weld lines described previously. But wrinkle lines appear as free curve in spite of almost straight lines in weld lines. Wrinkle is generated by re-conjunction of resin after jetting in the mold. The following preventive measures are effective.
(1) Set the cylinder temperature higher.
(2) Set the mold temperature higher.
(3) Set the injection speed slower.
(4) Change the gate location.
(5) Adjust the gate thickness connected to molded product nearly to the thickness of that part of the product.
