 |
盛業塑膠原料有限公司
主營產品： 工程塑料，通用塑料，熱塑性彈性體 |
|
盛業塑膠原料有限公司
主營產品： 工程塑料，通用塑料，熱塑性彈性體 |
暫無信息 |
| 參考價 | 面議 |
塑料機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2018-05-15 17:41:41瀏覽次數：295
聯系我們時請說明是塑料機械網上看到的信息，謝謝!
我公司銷售的材料均為*材料，咨詢采購！ 吳生 186 6517 6937
表面沉:
這是產品表面的沉,也稱為縮痕。
下列預防措施實際上是有效避免這種情況。
(1)設置注入壓力高。
(2)擴展在注入高壓持續時間。
(3)設置氣缸溫度低。
(4)設置在塑化螺桿旋轉的數量小。
(5)對薄壁成型,模具溫度不是很高。
(6)產品的厚度變化,另外提供一個門在厚的部分。
(7)提高樹脂飼料,使補償收縮的蛀牙必須持有高壓注射的一步。止回閥是用于這一過程。
(8)統一模具的表面溫度。
(9)放大澆道截面的流道和澆口,縮短的長度使樹脂流更容易,并設置氣缸溫度低。
Surface sink：
This is the sink of product surface that also called as sink mark.
Preventive measures listed below are actually effective to avoid this.
(1) Set the injection pressure higher.
(2) Extend the high-pressure duration at injection.
(3) Set the cylinder temperature lower.
(4) Set the number of screw rotation at plasticization smaller.
(5) For the thin wall molding, set the mold temperature not to be so high.
(6) For a product having thickness variation, provide a gate additionally at the thick part.
(7) Increase resin feed amount to enable to compensate the shrinkage in the cavities at the injection step required to hold high-pressure. Check-valve is useful for this process.
(8) Uniform the surface temperature of mold.
(9) Enlarge the cross section of sprue, runner and gate, shorten the length of them to make the resin flow easier, and set the cylinder temperature lower.
