東莞市欣榮塑膠《》有限公司*現貨供應如下產品：
WELLAMID Nylon 6000 GV 30 HWCP Nylon 6 （我司可提供COA，SGS，UL黃卡，加工參數。
*現貨供應（威爾曼）
| WELLAMID Nylon 6000 GS 40 HWCP Nylon 6 | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 25 HWUVCP Nylon 6 | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 CFGV 15/15 HWCP Nylon 6 | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 20 HWCP Nylon 6 | Nylon 6 | Electrically Conductive; Heat Stabilized | |
| WELLAMID Nylon 6000 GV 25 HWCP Nylon 6 | Nylon 6 | ||
| WELLAMID Nylon 6000 GV 30 HWCP Nylon 6 | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 20 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 25 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 30 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 30 HWUVCP | Nylon 6 | Good UV Resistance; Heat Stabilized | |
| WELLAMID Nylon 6000 GS 40 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 50 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GS 50 HWUVCP | Nylon 6 | Good UV Resistance; Heat Stabilized | |
| WELLAMID Nylon 6000 GV 10 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 15 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 20 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 25 HWCP | Nylon 6 | Heat Stabilized | |
| WELLAMID Nylon 6000 GV 25 HWUVCP | Nylon 6 | Good UV Resistance; Heat Stabilized |
| Product Description | |
| General | �0�2 |
| Material Status�0�2 | Commercial: Active |
| Availability�0�2 | Africa & Middle EastAsia PacificCentral AmericaEuropeLatin AmericaNorth AmericaSouth America |
| Filler / Reinforcement�0�2 | Glass Fiber Reinforcement, 43% Filler by Weight |
| Additive�0�2 | Lubricant |
| Features�0�2 | Good Dimensional StabilityLow Moisture AbsorptionLubricatedUltrasonic Weldable�0�2 |
| Uses�0�2 | Appliance ComponentsAutomotive ApplicationsElectrical/Electronic ApplicationsIndustrial Applications�0�2 |
| RoHS Compliance�0�2 | |
| Automotive Specifications�0�2 | |
| Appearance�0�2 | Natural Color |
| Forms�0�2 | Pellets |
| Processing Method�0�2 | Injection Molding |
| Part Marking Code （ISO 11469） | >PA612-GF43< |
| Resin ID （ISO 1043） | PA612-GF43 |
| Physical | Dry | Conditioned | Unit | Test Method |
| Specific Gravity | �0�2 | �0�2 | �0�2 | �0�2 |
| -- | -- | �0�2 | ASTM D792 | |
| -- | -- | g/cm�0�6 | ISO 1183 | |
| Molding Shrinkage | �0�2 | �0�2 | �0�2 | ISO 294-4 |
| Across Flow: 0.0787 in | -- | % | �0�2 | |
| Flow: 0.0787 in | -- | % | �0�2 | |
| Water Absorption | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F, 24 hr | -- | % | ASTM D570 | |
| Saturation, 73°F, 0.0787 in | -- | % | ASTM D570 | |
| Saturation, 73°F | -- | % | ISO 62 | |
| Equilibrium, 73°F, 0.0394 in, 50% RH | -- | % | ISO 62 | |
| Mechanical | Dry | Conditioned | Unit | Test Method |
| Tensile Modulus （73°F） | psi | ISO 527-2 | ||
| Tensile Stress | �0�2 | �0�2 | �0�2 | �0�2 |
| Break, 73°F | psi | ISO 527-2 | ||
| 73°F | psi | ASTM D638 | ||
| Tensile Elongation （Break, 73°F） | % | ASTM D638, ISO 527-2 | ||
| Flexural Modulus | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F | psi | ASTM D790 | ||
| 73°F | -- | psi | ISO 178 | |
| Flexural Strength （73°F） | -- | psi | ASTM D790 | |
| Shear Strength （73°F） | -- | psi | ASTM D732 | |
| Impact | Dry | Conditioned | Unit | Test Method |
| Charpy Notched Impact Strength | �0�2 | �0�2 | �0�2 | ISO 179/1eA |
| -40°F | -- | ft·lb/in�0�5 | �0�2 | |
| -22°F | -- | ft·lb/in�0�5 | �0�2 | |
| 73°F | -- | ft·lb/in�0�5 | �0�2 | |
| Charpy Unnotched Impact Strength | �0�2 | �0�2 | �0�2 | ISO 179/1eU |
| -22°F | -- | ft·lb/in�0�5 | �0�2 | |
| 73°F | -- | ft·lb/in�0�5 | �0�2 | |
| Notched Izod Impact | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F | ft·lb/in | ASTM D256 | ||
| -40°F | -- | ft·lb/in�0�5 | ISO 180/1A | |
| 73°F | -- | ft·lb/in�0�5 | ISO 180/1A | |
| Hardness | Dry | Conditioned | Unit | Test Method |
| Rockwell Hardness （R-Scale） | -- | �0�2 | ASTM D785, ISO 2039-2 | |
| Thermal | Dry | Conditioned | Unit | Test Method |
| Deflection Temperature Under Load | �0�2 | �0�2 | �0�2 | �0�2 |
| 66 psi, Unannealed | -- | °F | ASTM D648 | |
| 66 psi, Unannealed | -- | °F | ISO 75-2/B | |
| 264 psi, Unannealed | -- | °F | ASTM D648 | |
| 264 psi, Unannealed | -- | °F | ISO 75-2/A | |
| Glass Transition Temperature | -- | °F | ISO 11357-2 | |
| Melting Temperature | �0�2 | �0�2 | �0�2 | �0�2 |
| --�0�22 | -- | °F | ISO 11357-3 | |
| -- | -- | °F | ASTM D3418 | |
| CLTE | �0�2 | �0�2 | �0�2 | ASTM E831, ISO 11359-2 |
| Flow: -40 to 73°F | -- | in/in/°F | �0�2 | |
| Flow: 73 to 131°F | -- | in/in/°F | �0�2 | |
| Flow: 131 to 320°F | -- | in/in/°F | �0�2 | |
| Transverse: -40 to 73°F | -- | in/in/°F | �0�2 | |
| Transverse: 73 to 131°F | -- | in/in/°F | �0�2 | |
| Transverse: 131 to 320°F | -- | in/in/°F | �0�2 | |
| RTI Elec | �0�2 | �0�2 | �0�2 | UL 746 |
| 0.0280 in | -- | °F | �0�2 | |
| 0.0591 in | -- | °F | �0�2 | |
| RTI Str （0.0591 in） | -- | °F | UL 746 | |
| Electrical | Dry | Conditioned | Unit | Test Method |
| Surface Resistivity | -- | ohm | ASTM D257 | |
| Volume Resistivity | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F | ohm·cm | ASTM D257 | ||
| -- | -- | ohm·cm | IEC 60093 | |
| Dielectric Strength�0�23（73°F, 0.126 in） | -- | V/mil | ASTM D149 | |
| Dielectric Constant | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F, 1 kHz | -- | �0�2 | ASTM D150 | |
| 73°F, 1 MHz | -- | �0�2 | ASTM D150, IEC 60250 | |
| Dissipation Factor | �0�2 | �0�2 | �0�2 | �0�2 |
| 73°F, 1 kHz | -- | �0�2 | ASTM D150 | |
| 73°F, 1 MHz | -- | �0�2 | ASTM D150, IEC 60250 | |
| Comparative Tracking Index （CTI）（0.118 in） | -- | V | UL 746 | |
| Flammability | Dry | Conditioned | Unit | Test Method |
| Flame Rating （0.0280 in） | -- | �0�2 | UL 94, IEC 60695-11-10, -20 | |
| Related Terminology | ||||
| Dry | Product names can be difficult to match. You may have searched any one of these terms to find this product: Zy�0�377G43L NC010, Zy 77G43L NC010, Zy�0�3 , Zy, Zy77G43LNC010, 77 G 43 L NC 010, 77G43L NC010, 77G, G43, 43L, LNC, NC010, 77G43LNC010, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, DuPont, Polyamide612, Nylon612, G77 | |||
| Generic Name | ||||
| Dry | Generic Name may also be described by the following terms: PA612, PA6/12. | |||
| Conditioned | Generic Name may also be described by the following terms: PA612, PA6/12. | |||
| Features | ||||
| Dry | Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Ultrasonic Weldable. | |||
| Uses | ||||
| Dry | Uses may also be described by the following terms: Appliance Components, Appliance Parts, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector. | |||
| Automotive Specifications | ||||
| Dry | This plastic material has approval for 1 automotive specifications from the following agencies （the number in parentheses shows the number of specifications for that agency）: ASTM （1）. | |||
| Conditioned | Product names can be difficult to match. You may have searched any one of these terms to find this product: Zy�0�377G43L NC010, Zy 77G43L NC010, Zy�0�3 , Zy, Zy77G43LNC010, 77 G 43 L NC 010, 77G43L NC010, 77G, G43, 43L, LNC, NC010, 77G43LNC010, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, DuPont, Polyamide612, Nylon612, G77 |
| Injection | Dry | Unit | �0�2 |
| Drying Temperature | °F | �0�2 | |
| Drying Time | hr | �0�2 | |
| Suggested Max Moisture | % | �0�2 | |
| Processing （Melt） Temp | °F | �0�2 | |
| Melt Temperature, Optimum | °F | �0�2 | |
| Mold Temperature | °F | �0�2 | |
| Mold Temperature, Optimum | °F | �0�2 | |
| Drying Recommended | �0�2 | �0�2 |
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 210°C/min |
| 3Method A （Short-Time） |
| �0�2 |
| UL and the UL logo are trademarks of UL LLC �0�8 2013. All Rights Reserved. The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |
運費及注意事項：
1.珠三角地區1000KG以上可免費送貨上門或物流快遞運送,貨到驗貨滿意后付款，省外可協商！
2.若需要郵寄試機樣品的,我們可以為您免費提供原料試機。采用快遞或貨運,運輸費用由買家自付。
3.我們承諾期限內發貨，但對承運人效率無法作出保證，若物流快遞超出3天，貨運超出5天，請聯絡我們協助查詢,買家也可以根據交易狀態中填寫的單號信息，自行承運方，以便*時間獲知詳細信息
4.簽收貨物請注意我們快遞貨物時一般情況是在原塑膠產品外面在套了一個包裝，請在簽收貨物時一定要主要包裝是否破損，如破損請*時間告之我們
我們始終秉承'顧客就是上帝'的經營理念,一直不斷的努力，專心成為顧客的的伙伴。公司經過幾年的不斷開拓進取，良好的經營和周到的服務得到新老客戶的大力支持和好評，業務蒸蒸日上，規模不斷擴大。 一直我們都堅持以市場導向，積極參與市場競爭，不斷完善規范化管理。 愿與各界人士真誠合作，共同發展，攜手共創輝煌的明天。
我們始終堅持：
“ 堅持誠信做產品 堅持產品價格優 堅持服務態度美 堅持售后保證好 ”
鄭重聲明：本公司杜絕一次性水口料，副牌，抽粒等垃圾料！*代理供應進口原包塑膠原料：（提供MSDS、SGS（ROHS）、COA、FDA、ASTM、UL黃卡環保證書等） *原廠原包，貨真價實，假一賠十！
并能提供相關的加工技術指導。量大從優歡迎客戶合作！
：
文 http://www.eye-p2p.com
:文欣榮
:86- http://www.eye-p2p.com
傳真號碼:86-
地址:廣東 東莞市
其它產品
WELLAMID Nylon 6000 GV 30 HW Nylon 6
WELLAMID Nylon 6000 GV 25 HWUVCP Nylon 6
WELLAMID Nylon 6000 GV 25 HWCP Nylon 6
WELLAMID Nylon 6000 GV 20 HWCP Nylon 6
WELLAMID Nylon 6000 GV 15 HWCP Nylon 6
WELLAMID Nylon 6000 GV 10 HWCP Nylon 6
WELLAMID Nylon 6000 GV 10 HWCP Nylon 6
WELLAMID Nylon 6000 GS 50 HWUVCP Nylon 6
WELLAMID Nylon 6000 GS 50 HWCP Nylon 6
