Ateva EVA 1807V
This grade shows strong adhesion to PE, EVA, aluminum, and it has polyolefin-likeproperties.In addition, its processability is excellent.EVA is mainly intended for use as a adhesive resin in auto head liner.EVA based adhesive resin containing anhydride.圖片
Used during flexible lidding conversion
Whether you are running an extrusion coating, cast or blown film line, sealing to PP, PE, PS, PVC, PET, epoxy, Barex or Aclar, there is a grade of Appeel lidding sealant resin that will run in your process, and prove to be cost-effective while meeting the demands of brand owners and consumers.lidding sealant resins not only offer predictable and repeatable peel strength, but also provide a pre-compounded one-bag solution that easily runs in a variety of conversion processes.
They are solvent free and don’t require the environmental controls associated with solvent-based or lacquer heat seal coatings. Inventories and the number of SKU’s can be reduced.
lidding sealant resins have been formulated for versatility with all of this in mind for easy peel applications, and are only from DuPont. This brochure describes our current commercial offering of Appeel grades for lidding applications
as a number of Appeel resins seal to multiple substrates, leading to less-costly inventory.And there are no blends to be made, ensuring that the resins perform the way they should time after time.
EVA加工
Safety & Handling A Product Safety Bulletin, Material Safety Data Sheet, and more detailed information on compounding and processing Elvax resins for specific applications are available from your DuPont Packaging and Industrial Polymers representative.
can be used in conventional extrusion equipment designed to process polyethylene resins. However, corrosion-protected barrels, screws, adapters, and dies are recommended, since, at sustained melt temperatures above 446°F.
They can also be processed using conventional rubber processing techniques such as Banbury, two-roll milling and compression molding.
EVA resins can be processed by conventional thermoplastic processing techniques, including injection molding, structural foam molding, sheet and shape extrusion, blow molding and wire coating.
食品級EVA
This Regulation describes polymers that may be used in contact with food, subject to the finished food-contact article meeting the extractive limitations under the intended conditions of use, as shown in paragraph （b）（1） of the Regulation.
EVA Resin complies with Food and Drug Administration Regulation 21 CFR 177.1350（a）（1） - - Ethylene-vinyl acetate copolymers, subject to the limitations and requirements therein.
東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電!
電 話：
傳 真：
手 機：
：羅（業務）
:羅長龍
:
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場
銷售Ateva EVA 1807V其它產品
銷售Ateva EVA 1813
銷售Ateva EVA 1811
銷售Ateva EVA 1807G
銷售Ateva EVA 1807EG
銷售Ateva EVA 1807ASB
銷售Ateva EVA 1807A
銷售Ateva EVA 1807
銷售Ateva EVA 1806A
銷售Ateva EVA 1651
