DIC.PPS EC-10 PPS：
Design changes integrating the end plate and the adjacent insulating plate may reduce cost and weight as much as 90% compared to current fuel cell prototypes employing metal. Fuel Cell End PlatesInjection-molded end plates made from ’s polyphenylene sulfide （PPS） can provide significant cost and weight savings in proton exchange membrane （PEM） fuel cells.
Ferrule
The 8670A61 grade has outstanding flow properties, making it ideal for fine-structured design components such as plug connectors, known as ferrules. Other essential properties for this application are very low water absorption, low creep at high temperatures, good dimensional stability and even shrinkage in both flow and transverse directions. Vectra liquid crystal polymer is also used in fibre optics – particularly for connectors. The crucial factors here are Vectra’s good mechanical properties, even in thin wall sections, and the extreme precision with which ferrules can be made. Ferrules can be injection moulded to incorporate holes to carry the 125 μm thick glass fibres to tolerances of 1-2 μm. These ferrules use Vectra grade A460, specially developed for such applications.has been working closely with systems and cable manufacturers to develop a number of special （PPS） grades tailored specifically to the requirements of fibre optic technology.
PPS燃料電池的端板
由于它具有的屬性，以滿足燃料電池環境中的許多要求，玻璃纖維增強聚苯硫醚是一個出色的候選人端板材料。它的模具以及，復制優良特性，展品很少翹曲，可以很容易地承受壓縮堆棧所需的負荷。它具有優良的尺寸穩定性，并保留其機械性能遠遠高于80°C（176°F）的質子交換膜燃料電池的操作溫度。
它具有優良的*性離子水，氫，氧，丙烷，天然氣和其他碳氫燃料。
質子交換膜燃料電池組件，包含了約200系列連接細胞的堆棧。堆棧是通過端板螺栓連接到一起保存在棧雙極板和壓縮它們之間的墊片一起舉行。干預絕緣板無聊歧管喂氫燃料，空氣和冷卻水氧化堆棧，以及刪除單元操作過程中產生的水。即使與自動化加工，兩套板價格從300美元到500美元。的開發工作表明，結合一體注塑成型板和絕緣組件可以減少板的成本，每個堆疊美元之間，100美元和120，同時也減少了至少10磅（4.95公斤）棧重量。除此之外，PPS是一個很好的絕緣體，具有低的熱膨脹，吸收少量的水，是固有的阻燃。重要的是，PPS具有與它接觸流體的電導率的影響不大。注塑月底從公司的聚苯板聚苯硫醚（PPS）在質子交換膜（PEM）燃料電池可提供顯著的成本和重量節省。整合終板和相鄰的絕緣板的設計變更可能減少高達90％相比，目前的燃料電池原型，采用金屬的成本和重量。
Aerospace Wing and Leading Edge Nose
This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）. Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380.This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes.
產品圖片
東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電!
電 話：
傳 真：
手 機：
：羅（業務）
:羅長龍
:
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場
銷售DIC.PPS EC-10 PPS其它產品
銷售Zy FG70G30HSLR NC010
銷售Zy FG42A NC010
銷售DIC.PPS CZL-5000 PPS
銷售Zy FG408L NC010
銷售DIC.PPS CZL-4033 PPS
銷售Zy FG101L NC010
銷售Zy E51HSB NC010
銷售DIC.PPS CZL-2000 PPS
銷售Zy BM70G20HSLX BK537
