SZ
Technical Data for SZ-4800A Injection moulding machine
| 項目 Item | 單位 | 參數 | ||
| 合模力 Max. clamping force | KN | 4800 | ||
| 移模行程 Max. opening force | mm | 770 | ||
| 拉桿有效間距（V×H） Space between tie bars | mm | 760×760 | ||
| 允許的模厚（min-max） Mould height | mm | 280-790 | ||
| 模板zui大開距 Max. daylight | mm | 1560 | ||
| 液壓頂出力 Ejector force | KN | 113.4 | ||
| 液壓頂出行程 Ejector stroke | mm | 195 | ||
| 液壓頂出桿的總數 Ejector quantity | | 13 | ||
| 螺桿的直徑 Screw diameter | mm | 70 | 75 | 80 |
| 螺桿的長徑比 Screw L/D ratio | L/D | 22.6 | 21 | 19.7 |
| 理論注射容積 Theoretical shot volume | cm3 | 1346 | 1545 | 1758 |
| 注射質量（PS料） Plasticising weight（PS） | g | 1225 | 1406 | 1600 |
| 注射壓力 Injection pressure | Mpa | 201 | 175 | 154 |
| 理論注射速率（PS料） Theoretical injection rate（PS） | g | 370 | 423 | 484 |
| 塑化能力（PS料） Plasticising capacity（PS） | g/s | 60.4 | 71.4 | 83.7 |
| 螺桿驅動扭矩 Screw torque | N.m | 3490 | ||
| 螺桿zui高轉速 Max. screw rotate speed | r/min | 150 | ||
| 注射行程 Injection stroke | mm | 350 | ||
| 移座推力 Carriage push force | KN | 120.6 | ||
| 油泵電動機功率 Pump motor power | KW | 45 | ||
| 油泵zui高壓力 Pump pressure | Mpa | 16 | ||
| 料筒加熱功率 Heating power | KW | 28 | ||
| 加熱區段 Heating zone | | 5 | ||
| 機器的外形（L×W×H） Size | m | 7.5×2.1×2.45 | ||
| 機器的凈重 Net weight | t | 20 | ||
| *型號 International designation | | 4800-2710 | ||
