SZ-2000A注塑機的技術參數
Technical Data for SZ-2000A Injection moulding machine
| 項目 Item | 單位Unit | 參數 Data | ||
| 合模力 Max. clamping force | KN | 2000 | ||
| 移模行程 Max. opening force | mm | 500 | ||
| 拉桿有效間距（V×H）Space between tie bars | mm | 505×505 | ||
| 允許的模厚（min-max） Mould height | mm | 190-530 | ||
| 模板zui大開距 Max. daylight | mm | 1030 | ||
| 液壓頂出力 Ejector force | KN | 53.1 | ||
| 液壓頂出行程 Ejector stroke | mm | 125 | ||
| 液壓頂出桿的總數Ejector quantity | | 5 | ||
| 螺桿的直徑 Screw diameter | mm | 50 | 55 | 60 |
| 螺桿的長徑比 Screw L/D ratio | L/D | 23.1 | 21 | 19.3 |
| 理論注射容積Theoretical shot volume | cm3 | 491 | 594 | 707 |
| 注射質量（PS料）Plasticising weight（PS） | g | 447 | 540 | 643 |
| 注射壓力 Injection pressure | Mpa | 215 | 178 | 149 |
| 理論注射速率（PS料）Theoretical injection rate（PS） | g | 145 | 175 | 208 |
| 塑化能力（PS料）Plasticising capacity（PS） | g/s | 22.5 | 28.7 | 35.4 |
| 螺桿驅動扭矩 Screw torque | N.m | 1510 | ||
| 螺桿zui高轉速 Max. screw rotate speed | r/min | 170 | ||
| 注射行程 Injection stroke | mm | 250 | ||
| 油泵電動機功率 Pump motor power | KW | 18.5 | ||
| 油泵zui高壓力 Pump pressure | Mpa | 16 | ||
| 料筒加熱功率 Heating power | KW | 16.6 | ||
| 加熱區段 Heating zone | | 4 | ||
| 機器的外形 （L×W×H） Size | m | 5.9×1.5×2.0 | ||
| 機器的凈重 Net weight | t | 6.8 | ||
| 油箱容積 Oil Tank Capacity | L | 420 | ||
| *型號International designation | | 2000-1060 | ||
