| 類別Caterory | U型機系列(直線導軌）/U Series(Linear Guide Way) | |||
| 機型 | SCJ 100-55U2X4.15G | |||
|
| 項目 | Items | 單位 Units | 參數Specification |
| 基本參數 Specification | 類別 | Category | / | 雙層 2 s |
| 制品容積
| Max. Blow Volume
| L | 1.6 | |
| 適用原料 | Material | / | PE,PP | |
| 模頭坯料數量 | Qty.Of Die Head | / | 4 | |
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 170/180 | |
| 機器凈重約 | Net Weight | kg | 18000 | |
| 機器外形尺寸 | Machine Dimension | mm，L×W×H | 6x3900x4800 | |
| 模頭 | 模頭加熱段數 | Die Head Heating Zone | / | 7 |
| 模頭加熱功率 | Die Head Heating Power | kW | 10.5 | |
| 鎖模架系統 | 模架數量 | Qty.Of Station | / | 2 |
| 最小合模距 | Min Clamping Distance Of Mold | mm | 230 | |
| 開模距 | Max Clamping Distance Of Mold | mm | 620 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 750x470 | |
| 擺架行程 | Carriage Stroke | (mm) | 900 | |
| 鎖模力 | Clamping Force | kN | 280 | |
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 100/55 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 27/23 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-66/20-40 | |
| 塑化能力 | Max Extrusion Capacity | kg/h | 230/280/(25) | |
| 擠出電機額定功率 | Extruder Motor Rated Power | kW | 75/90 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4/3 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 17/6.2 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 1.85/0.08 | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 30 |
| 液壓系統額定工作壓力 | Hydraulic System Rated Working Pressure | Mpa | 16 | |
| 氣動系統額定工作壓力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |
| 水冷系統額定工作壓力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 16 | |
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |
| 裝機總功率I | Total Installed Power I | kW | 150.13/165.13 | |
| 備注 | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/300 |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 50 points parison control system,parameters would be changed as below:
| |||
| 疊加壁厚控制后 After with 100 points parison control | 機型 | Model | / | SCJ 100-55U+S2X4.15G |
| 壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | |
| 裝機總功率II | Total Installed Power II | kW | 153.7/168.7 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | ||
|
| ||||
| 備注： | ||||
| Note: | ||||
