特點介紹：
1、ZP致勝PET專用機主要適用于PET瓶胚及PET包裝類行業，配置大功率動力，大扭距馬達，大頂出力油缸。
ZP Zhisheng PET special machine is mainly applicable to PET bottle embryo and PET packaging industry,
equipped with high-power power, large-torque motor and large-top output oil cylinder.
2、標配注射開環配置與手動背壓組合，長周期保壓穩定可靠。
The combination of standard injection open-loop configuration and manual backpressure
ensures stable and reliable long-term pressure maintaining.
3、PET專用螺桿設計，長徑比均大于23:1，兼顧塑化效率與塑化效果。
PET special screw design, the length-diameter ratio is greater than 23:1,
taking into account the plasticizing efficiency and plasticizing effect.
4、料筒標配陶瓷加熱圈，適配PET材料高溫需求與加熱高穩定性。
The barrel is equipped with ceramic heating ring as standard, which is suitable for
the high temperature demａnd of PET material and high heating stability.
5、客戶可根據產品克重及成型周期要求選擇不同射臺與合模部分進行組合。酒類包裝需要根據合模部分降一級或兩級射臺進行匹配。
Customers can select different injection tables and clamping parts for combination according to product weight and
molding cycle requirements. Wine packaging needs to be matched by one or two stages of shooting table according
to the mold closing part.
6、可選配電動儲料裝置與開合模同步功能。
It can be equipped with electric storage device and mold opening and closing synchronization function.
| 技術參數表 SPECIFICATION | ZP380/IU2300 | |||||||
| 注射部分 INJECTION UNIT | A | B | ||||||
| 注射容積 Shot Weight | cm3 | 848 | 1657 | |||||
| 注射量(PS) Injection Weight | g | 1052 | 2055 | |||||
| 螺桿直徑 Screw Diameter | mm | 60 | 75 | |||||
| 螺桿長徑比 Screw L/D Ratio | Sc | 26 | 24 | |||||
| 對空注射速率 Injection Rate | cm3/s | 333 | 420 | |||||
| 注射壓力 Injection Pressure | Mpa | 162 | 139 | |||||
| 塑化能力 Plasticzation Capacity | g/s | 58 | 88 | |||||
| 螺桿轉速 Max Screw Speed | rpm | 130(200) | ||||||
| | | |||||||
| 合模部分 CLAMPING UNIT | | | ||||||
| 合模力 Clamping Force | Kn | 3800 | ||||||
| 移模行程 Clamping Stroke | mm | 700 | ||||||
| 連接柱內矩 Space Between Tie Bar(HxV) | mm | 710*710 | ||||||
| 模板距離 Max. Daylight | mm | 1450 | ||||||
| 容模厚度（最小-） MaxMold Height （ Min-Max) | mm | 250-7750 | ||||||
| 頂出行程 Ejector Stroke | mm | 180 | ||||||
| 頂出推力 Ejector Force | Kn | 125 | ||||||
| 電控部分 CONTROL UNIT | | | ||||||
| 系統壓力 System Pressure | Mpa | 17.5 | ||||||
| 油泵電機功率/儲料電機功率（選配）※ Pump Motor Power/Power of storage motor(optiona)※ | Kw | 43/53 (一體式直驅) | ||||||
| 電熱功率 Heater Power | Kw | 30 | ||||||
| 溫度控制區 No.of Heater Control Zone | zone | 6 | ||||||
| 其他 OTHERS | | | ||||||
| 油箱容量 Oil Tank Capacity | L | 500 | ||||||
| 理論重量 Machine Weight | T | 13 | ||||||
| 外型尺寸 Machine Dimension (LxWxH) | M | 6.6x1.65x2.2 | ||||||
本網站所有技術參數僅供參考，本公司保留修改技術參數的權利，恕不另行通知。All technical parameters of this website are for reference only. The company reserves the right to modify the technical parameters without notice.
-
-
高速射膠，成型快
高排量的液壓系統設計，注射速度比同類型產品提高15%，縮短成型周期
高排量的液壓系統設計，動力系統加大，注射速度比同類型產品提高15%，模循環周期縮短10-15%，全面提升注塑機表現，可滿足高標準的成型要求
油路板分布在各執行元件位置，響應速度快，動態性能好，注塑過程更快速，產品成型更好
-
-
射膠穩定，更省心
一線式雙缸平衡注射裝置，顯著提高射膠穩定性，重復精度高，避免熔接痕、密度不均
注射單元采用模組化的托板座設計，一線式雙缸平衡注射裝置，使螺桿在注塑過程中受力均勻，顯著提高射膠穩定性，使料筒定位更加準確
高剛性的寬模板設計，配合高安全系數的拉桿，整體提升合模結構的剛性及穩定性
-
-
高效節能，更省錢
伺服驅動器運行原理+節能加熱裝置，能耗低，壽命更長，節省成本
伺服驅動器在鎖模保壓冷卻等階段能輸出壓力但保持速度接近零速，因而功率消耗小，更節能
料筒采用納米遠紅外高效節能加熱裝置，改善了傳統加熱圈電熱轉換效率低、熱傳導率低、表面溫度高“兩低一高”缺點，比傳統加熱圈節能30%-40%
-
-
安全可控，更放心
彩色大屏幕控制面板，急停開關保護，動作全面監控，實時監測，安全可控
控制面板采用彩色屏幕，實時監測生產進程，并顯示各種故障診斷，操作更省心
人性化工藝參數設置，設置急停開關，動作全面監控，保護工作人員人身安全
