HC-1.5/400 air tightness test high-pressure air compressor

• Model: HC-1.5/400

• Type: V-type five cylinder five stage compression

• Nominal volume flow: 1.5m3/min

• Suction pressure: atmospheric pressure MPa

• Maximum exhaust pressure: 40MPa

• Suction temperature: ≤ 40 ℃

• Crankshaft speed: 730r/min

• Piston stroke: 110mm

• Diameter of first stage cylinder: ￠ 210 * 1mm

• Shaft power: ≤ 37KW

• Lubricating oil temperature: ≤ 70 ℃

• Lubricating oil consumption: ≤ 30g/h

• Adjustment mode: PLC microcomputer control

• Cooling mode: air cooling

• Cooling air pressure: 120P ℃

• Cooling air volume: 16000m3/h

• Transmission mode: belt transmission (5C)

• Lubrication method: oil pump pressure lubrication

• Lubricating oil model: special oil for fully synthetic high-pressure compressor

• Noise sound power level (LWA): ≤ 95

• Cleanliness: ≤ 900

• Vibration intensity: ≤ 18

• Operating Weight: 1250 (including wooden box packaging) Kg

• Overall dimensions (L * W * H): 1800 * 1250 * 110mm

• Electric control system: PLC control, automatic start stop, automatic blowdown, overload protection, phase sequence protection, phase loss protection, low oil protection, pressure monitoring and temperature monitoring.

四、工作原理

This product is produced in batches after the design change and optimization of the German model. The last piston adopts the titanium nitride process, the piston ring adopts the Japanese Riken process, and all the casting products are cast in the large-scale factory of outsourcing profession. The product has been on the market for more than ten years, and has been unanimously praised by users. At the same time, our production process is superior to other domestic companies. This product adopts four cylinder four stage compression, splash lubrication, interstage safety valve and filtering system. HC-1.5/400 can provide safe compressed air for any industry requiring high-pressure air source. This product is designed, produced, commissioned and accepted in accordance with the requirements of Marine High Pressure Piston Air Compressor (GB/T 12929-2008); This product is an air compressor, which compresses 1kg (1bar/0.1Mpa) of air in free state to a high pressure gas with a gauge pressure of 400kg (400bar/40Mpa) step by step. After passing through the separator and filter in the unit, this air removes the oil and impurities contained in the high pressure air, providing highly purified, clean, safe and reliable compressed air.

五、 Product composition and characteristics

Motor protection

The air compressor controller has overload protection function for the main motor. In case of motor stalling, overload and other faults during machine operation, the motor will stop running and give an alarm.

Inlet air over temperature protection

When the intake air filter is blocked, the cooler is blocked, and the intake and exhaust valves are damaged, resulting in the intake air temperature being higher than the upper limit of the set temperature, the controller will alarm and shut down.

Supply pressure overpressure protection

When the air supply pressure is higher than the set high pressure limit, the controller will alarm and shut down.

Oil shortage protection

When the crankcase is short of oil, the controller alarms and shuts down to prevent the machine from working without oil.

Timing function

The machine has a timed shutdown function, which is used for timed machine maintenance. The password can be set freely.

六、 Main applications

七、   Product display