適用范圍Scope of application:.
1、廣泛運用于鞋墊商標的熱轉印、鞋舌標、內里標的轉印，用于各類熱轉印標的熱轉印工藝。Widely use in the flat,circular insole/tongue thermal transfer for label.
2、適用于皮革、包裝等行業的燙金工藝。Suitable for the gold stamping of leather, package and other industries.
產品特點Features：
1、 人機界面智能化，中英越多種國家語言，操作直觀。Intellectualized human- machine interface, Chinese/English/ Vietnamesesystems,easy to operate.
2、 采用高精度光纖定位，轉印紙自動定位，定位進度可達±0.02mm以內，足以適用所有品牌精度要求。High precision fibre-optical position system, auto location of transfer paper, position accuracy to±0.02mm.
3、 轉印紙采用卷對卷形式，相對小片材式轉印紙，更方便管理，使用過后更容易處理，環境保持整潔。Roll to roll transfer paper, convenient management, keep the environment clean and tidy.
4、 采用一對一定位方式，從而適用于人工印刷的轉印紙。不會因為人工印刷轉印紙導致的轉印標之間的間距誤差而產生偏差。Use the one-to-one locate mode, manual printing transfer paper also issuitable, there is no any error because thedistance different.
5、 操作簡單，人工只需根據定位塊放置材料，生手即可快速掌握，大大減少工廠培訓成本，產能不因熟手的流失而下降。Easy to operate, workers only need put the material according to the position of locating piece, novices can easy to handle, greatly reduce the factory training cost, and the output will not decrease when the skilled worker leaves.
6、 在確保精度的情況下，轉印效率大大高，效率可達1200片/小時。Highefficiency, the maximum yield 1200pcs/ hour.
7、 溫度、壓力、轉印時間均可根據客戶實際要求設置，可以根據溫度的偏差進行糾正，可根據客戶要求設置溫度異常、氣壓壓力異常報警。保證產品品質。Temperature, pressure, pressing time can be adjusted according to the press effect, and also can set the trouble alarm of temperature trouble alarm, pneumatic pressure to ensure the product quality.
8、 一機多用，除了商標的熱轉印，還可以只需更換燙印模具即可進行燙金操作，切換簡單。Multi-purpose, also can gold stamping after change the mold.
型號Model No. | 機臺尺寸（mm）Machine measure | 出口木箱尺寸(mm) Wood case measure | 凈重/毛重（kgs） N.W/ G.W (kgs) | 產能Capacity |
FLD-590C | 1140*830*1460 | 1200*890*1560 | 210/240 | 1200片/小時 1200pcs/ hour |
FLD-590C-1 | 1200*655*1360 | 1250*730*1560 | 190/245 | |
電源電壓Voltage | 氣源氣壓Air pressure | 功率Power | 溫度可調范圍Heat transfer temperature | |
AC220V50HZ | 0.45~0.55mpa | 1.5KW | 30~280℃ |
對比Contrast：
產能對比Capacity | 生手熟手對產能影響The impact of skilled and novice | 操作人數Operator | 放料方式Feeding way | 定位方式Locate mold | |
傳統設備Traditional machine | 600片/小時 600pcs/h | 大Big | 1 | 手動Manual | 人工定位，精度穩定性低Manual location, low accuracy |
FLD-590C/C-1 | 1200片/小時 1200pcs/h | 小Small | 1 | 手動Manual | 光纖定位，精度穩定性高Fibre-optical location, high accuracy |
總結Conclustion：1、采用FLD-590C設備，比傳統人工定位更加精確，保證了品質的前提下還大大提高了生產效率，給工廠帶來*的前提下還能節省人工成本。按照人工平均工資每月3500元計算，一年可節省3500*12=42000元/人/年。Use FLD-590C, higher accuracy location than manual location, high efficiency, and can save the labor cost. For example: Monthly labor cost 3500 yuan, labor cost is 3500x12=42000 a year, if use the FLD-590C, twice capacity of the traditional machine, so can save 42000 yuan a year.
2、采用FLD-590C設備對熟手依賴性降低，確保工廠每日產能不受熟練工的缺勤而影響，使工廠產能更加可控。Use FLD-590C is less depending on skilled, ensure the daily capacity.
富倫德主要生產燙商標機、削泡棉機、鞋墊燙標機、鞋舌轉印燙金機、鞋墊熱轉印機、鞋墊裁斷轉印一體機、鞋墊印刷機、絲印機、壓花機、軟膠設備、真空硫化機、硅膠商標機、點膠機等.
適用范圍：機器主要用于橡膠、鞋、箱包、手套、皮具、服裝、體育用品、運動器材、玩具、硅膠用品廠等行業的各種不同形狀沖孔、裁邊、鞋墊轉印,商標燙印,印刷等。
