| 項目 | Item | 單位 | Z2800/JD | ||
| 注射裝置 | INJECTION UNIT | A | B | C | |
| 螺桿直徑 | Screw diameter | mm | 170 | 200 | 215 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 19293 | 35154 | 43530 |
| 注射重量 | Injection weight(ps) | g | 17557 | 31990 | 39612 |
| 注射速率 | Injection rate | g/s | 1779 | 2095 | 2121 |
| 注射壓力 | Injection pressure | Mpa | 161 | 137 | 135 |
| 螺桿轉速 | Screw speed | rpm | 60 | 50 | 45 |
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | kN | 28000 | ||
| 移模行程 | Open stroke | mm | 2000 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 1900×1750 | ||
| 模厚 | Max.Mold height | mm | 1900 | ||
| 最小模厚 | Min.Mold height | mm | 1000 | ||
| 頂出行程 | Ejector stroke | mm | 450 | ||
| 頂出力 | Ejector stroke | kN | 430 | ||
| 其他 | OTHERS | ||||
| 油泵壓力 | Max Pump pressure | kW | 16 | ||
| 油泵電機功率 | Pump motor power | kW | 55×4 | ||
| 電熱功率 | Heating power | kW | 171.7 | 171.7 | 187.9 |
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 18.9×3.92×5.2 | 18.9×3.92×5.2 | 19.3×3.92×5.2 |
| 油箱容積 | Olitank cubage | L | 4420 | ||
| 機器重量 | Machine weight | t | 190 | 195 | 207 |
未找到相應參數組，請于后臺屬性模板中添加
暫未實現,敬請期待
暫未實現,敬請期待
