| 类别Caterory | U型机系列(直线导轨）/U Series(Linear Guide Way) | |||
| 机型 | SCJ 100-55U2X4.15G | |||
|
| 项目 | Items | 单位 Units | 参数Specification |
| 基本参数 Specification | 类别 | Category | / | 双层 2 Layers |
| 制品容积
| Max. Blow Volume
| L | 1.6 | |
| 适用原料 | Material | / | PE,PP | |
| 模头坯料数量 | Qty.Of Die Head | / | 4 | |
| 常用模头中心距 | Die Head Distance (Center to Center) | mm | 170/180 | |
| 机器净重约 | Net Weight | kg | 18000 | |
| 机器外形尺寸 | Machine Dimension | mm，L×W×H | 6x3900x4800 | |
| 模头 | 模头加热段数 | Die Head Heating Zone | / | 7 |
| 模头加热功率 | Die Head Heating Power | kW | 10.5 | |
| 锁模架系统 | 模架数量 | Qty.Of Station | / | 2 |
| 最小合模距 | Min Clamping Distance Of Mold | mm | 230 | |
| 开模距 | Max Clamping Distance Of Mold | mm | 620 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 750x470 | |
| 摆架行程 | Carriage Stroke | (mm) | 900 | |
| 锁模力 | Clamping Force | kN | 280 | |
| 挤出系统 Extruder Unit | 螺杆直径 | Extruder Diameter | mm | 100/55 |
| 螺杆长径比 | Extruder Length/Diameter Ratio | L/D | 27/23 | |
| 螺杆转速 | Extruder Rotating Speed | r/min | 20-66/20-40 | |
| 塑化能力 | Max Extrusion Capacity | kg/h | 230/280/(25) | |
| 挤出电机额定功率 | Extruder Motor Rated Power | kW | 75/90 | |
| 机筒加热段数 | Barrel Heating Zone | / | 4/3 | |
| 机筒加热功率 | Barrel Heating Power | kW | 17/6.2 | |
| 冷却风机功率 | Cooling Fan Power | kW | 1.85/0.08 | |
| 动力系统 Power Unit | 油泵电机额定功率 | Oil Pump Motor Rated Power | kW | 30 |
| 液压系统额定工作压力 | Hydraulic System Rated Working Pressure | Mpa | 16 | |
| 气动系统额定工作压力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |
| 水冷系统额定工作压力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |
| 通用制品耗气量（压缩后） | Universal product air consumption(compressed) | m³/h | 16 | |
| 热切刀变压器功率 | Hot Cutter Power | kW | 2 | |
| 装机总功率I | Total Installed Power I | kW | 150.13/165.13 | |
| 备注 | 液压油牌号/油箱容积 | Hydraulic oil NO. / tank volume | L | 46#/300 |
| 冷水机选型（风冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
| 空压机选型（加储气罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |
| 备注/Remarks： | 以上机型均可叠加100点壁厚控制系统，叠加后改变的参数如下/All the machines above can be optionally equipped with 50 points parison control system,parameters would be changed as below:
| |||
| 叠加壁厚控制后 After with 100 points parison control | 机型 | Model | / | SCJ 100-55U+S2X4.15G |
| 壁厚油泵电机额定功率 | Parison Motor Rated Power | kW | 5.5 | |
| 装机总功率II | Total Installed Power II | kW | 153.7/168.7 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | ||
|
| ||||
| 备注： | ||||
| Note: | ||||
