| CH180GS | ||
| 標準規格 International Specifications | UNIT | 1800/430 |
| 注射裝置 INJECTION UNIT | 單位 | A |
| 螺桿直徑 Screw diameter | mm | 40 |
| 螺桿長徑比 Screw L/D ratio | L/D | 21.0 |
| 理論注射容量Shot Size(Theoretical) | cm3 | 243 |
| 注射重量 Shot weight(PS) | g | 223 |
| 注射速率 Injection rate(PS) | g/s | 383 |
| 注射壓力 Injection pressure | Map | 175.0 |
| 塑化能力 Plasticizing capacity(PS) | g/s | 29 |
| 螺桿轉速 Max.screw speed | rpm | 0-350 |
| 合模裝置 CLAMPING UNIT | ||
| 開模力 Clap tonnage | KN | 1800 |
| 開模行程 Opening stroke | mm | 485 |
| 四柱間距 Distance Btwn. Tie Bars | mm | 520x480v |
| 容模量 Mould Thickness Range | mm | 180-520 |
| 頂出行程 Ejector stroke | mm | 90 |
| 頂出力 Ejector force | KN | 67 |
| 其它 OTHERS | ||
| 系統壓力 System pressure | Mpa | 16 |
| 馬達功率 Major motor Power | kw | 39.0 |
| 電熱功率 Heator Power | kw | 8.35 |
| 外型尺寸 Machine dimensions(LxH) | m | 4.93x1.48x1.98 |
| 理論機重 Machine weight | Tom | 6.5 |
| 料斗容積 Hopper Capacity | kg | 60 |
| 容積 Oil tank capacity | L | 530 |
| 模板正面尺寸圖 Platen dimensions
| ||
| 模板側面尺寸圖 Mould space dimensions | ||
