配電腦控制,變頻調速、風冷、水冷、氮化螺桿機筒配混煉段、混煉頭及強制下料
槽、儲料缸機頭“*先出”式。大液壓站控制注料、合模、充氣、預吹及模具油缸等
。小液壓站配日本穆格伺服壁厚控制系統和德國力士樂壁厚控制系統,任需求方選擇。
螺桿直徑 | Screw diameter | 100mm |
螺桿長徑比(L/D) | Screw L/D ratio | 25:1 |
塑化能力(zui大) | Max. plasticating capacity(PE) | 180kg/h |
機筒加熱區段 | Number of barrel heating zone | 4區 |
儲料缸機筒加熱區段 | Number of Material tank zone | 4區 |
儲料缸容積kg | The volume of material tank ( kg) | 8kg |
拉桿間距 | Distance of centre of the pull rod | 900mm×1200mm |
zui大模板間距 | Max. space between platens | 1500mm |
鎖模力(zui大) | Clamping force | 25KN |
模具zui大寬度 | Max.mold dim. | 800mm |
每分鐘空循環次數 | Empty number of times of circulation of each minute | 2次 |
主電機功率 | The electrial machinery merit rate | 30KW |
油泵電機功率 | Extruder driving power | 37.5KW(大站30KW,小站7.5KW) |
加熱功率 | Heating power | 18KW |
外形尺寸(長×寬×高) | The mould size outside(L×W×H) | 5000×2000×3800 |
總 質 量 | The machine weight(T) | 12.8T |