全新一代耐電壓擊穿試驗機，電氣強度優質廠家

(BDJC-50KV)

全新一代耐電壓擊穿試驗機，電氣強度優質廠家適用范圍：

   主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等絕緣材料及絕緣件）在工頻電壓或直流電壓下擊穿強度和耐電壓的測試。

   由電腦控制，是我公司自主研發的全新第三代介電擊穿檢測儀器，電子控制系統是通過西門子PLC控制，數據采集方式通過光電隔離，有效解決試驗過程中的抗干擾問題，軟件操作使用方便，能夠實時顯示動態曲線，同時升壓速率無級可調，可以根據自己的需要進行升壓速率調節，調節范圍在10V-5000V/S，處于國內*地位（國內*能達到此功能的廠家），使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。可實時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。

注意事項：

1、儀器安裝時應具有獨立的接地線。
2、在開機前，操作者要首先熟悉操作方法。
3、儀器不能在有強烈腐蝕性氣體及有顆粒雜質的氣體環境中使用。
4、試驗環境溫度15度到25度之間，相對濕度60％到70％之間
5、試樣擊穿瞬間有火花產生并伴有聲響，屬正常現象。
6、每次更換試樣或接觸高壓電極時必須用高壓放電棒對高壓電極進行放電，放電時間5秒以上。
7、每次進行試驗前，必須檢查儀器接地

軟件功能:
01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作
02、曲線顯示：在實驗過程中可以動態顯示試驗曲線
03、數據導出：可以對試驗結果導入EXCEL表格
04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印
05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇
06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗
07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值
08、試樣設置：可對不同標準的試樣參數靈活設置
09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響
10、標準選擇：含有不同標準，可根據需求自行選擇
11、連續操作：連續操作試驗時，可直接在軟件里結束試驗，進行二次試驗

技術要求：

01、輸入電壓： 交流220 V

02、輸出電壓： 交流 0--50 KV 

                   直流0—50 KV   

03、電器容量： 3KVA

04、擊穿zui大輸出電流：100mA  30mA （可調換）

05、高壓分級： 0--5KV； 0-10KV；0-30KV; 0-40KV; 0-50KV,0-50KV;

06、升壓速率： 10V/S 100V/S  200V/S  500V/S  1000V/S 2500V/S 3000V/S   

07、試驗方式：

           直流試驗：1、擊穿試驗 2、梯度升壓  3、耐壓試驗 

           交流試驗：1、擊穿試驗  2、梯度升壓  3、耐壓試驗

08、擊穿判停方式：1、電壓判停 2、電流判停

09、電壓試驗精度： ≤ 1％

10、試驗方式：1、絕緣試樣空氣中試驗2、絕緣試樣浸油中試驗

11、黃銅電極規格： ￠25mm 兩個   ￠75mm一個

12、主機尺寸：長寬高約700*800*1500（MM）

14、防護罩材質：有機玻璃

15、設備重量：約120KG

主要配置：

1、 試驗主機一臺
2、 5萬伏高壓發生器一臺
3、 全自動微電腦電壓調壓裝置一套(串口方式)
4、 試驗電極規格(紫銅)
5、 試驗用油盒一只：材質為有機玻璃
6、 電磁自動放電裝置一套。
7、 電壓擊穿計算機測控軟件一套
8、 計算機一套(抗強干擾計算機) 
9、彩色噴墨打印機一臺(惠普品牌)
10、*計量鑒定質檢證書一份
11、產品使用說明書一份
12、合格證一份 

產品特點：

1、運行于WIN  XP/WIN7/WIN8系統下的獨立安裝軟件，界面友好，操作簡單

2、實驗顯示曲線，數據自動儲存，自動查找

3、多種用途可以進行交、直流試驗試驗準確、可靠、安全

4、計算機控制試驗過程，自動判斷停止，自動復位

5、超壓、過流、短路、漏電、誤操作等多種保護

操作步驟：

1、試驗前的準備：
1）打開試驗機右側的總電源開關,預熱15分鐘。
2）打開計算機進入Windows系統。雙擊本儀器軟件的快捷圖標打開試驗登錄界面輸入登錄密碼即可進入試驗界面。
2、交直流試驗的切換
1）本儀器高壓輸出為交流電壓。直流的獲得方式為在原回路中串入高壓硅堆，使測試回路為脈動的直流電壓。實現的過程為，硅堆已經在高壓變壓器的高壓絕緣塔中，平時用一個短路桿把高壓硅堆短接。需要直流試驗時，取出短路桿，使高壓硅堆接入測試電路中，這時回路的電壓為脈動的直流電壓。
2）前面板直流交流選擇按鈕。該按鈕的狀態不能改變設備輸出的電壓性質。按下該按鈕，設備僅僅是把直流報警電路接入。指示用戶，當打開箱門時，您需要對高壓均壓球放電。轉動放電桿，使放電桿的端部銅球接觸高壓均壓球。建議用戶每次放電銅球接觸高壓均壓球時間大于五秒。
3）試驗的交直流電壓切換，主要取決于高壓絕緣塔中的短路桿是否取出。當取出短路桿時，高壓均壓球上的電壓為直流電壓，插入短路桿時，高壓均壓球上的電壓為交流電壓。短路桿的取出、插入參看左側的示意圖。
4）在直流試驗時，計算機也要選擇直流狀態，否則測的結果是不正確的。簡單的說，交流電壓與直流電壓有倍的關系。

Scope of application:
Mainly used in solid insulating materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Controlled by computer, is my company independent research and development of the all new 3rd generation dielectric breakdown testing instrument, electronic control system is controlled by Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problems of anti interference in the process of test, software is convenient to operate and use to real-time display dynamic curve, also boost speed stepless adjustable can according to their own needs of pressurization rate regulation, regulating range in 10V-5000V/S, in the domestic leading position (the only way to achieve the function of manufacturers), so that the pressure rate truly uniform and accurate, and can accuray measure the leakage current data. Can draw the test curve in real time, display the test data, judge accuray, and can save, analysis, print the test data.
Matters needing attention:
1, the instrument installation should have a separate ground wire.
2, before the start, the operator must first familiar with the operation method.
3, the instrument can not have a strong corrosive gas and particulate impurities in the gas environment to use.
4, the test environment temperature of 15 degrees to 25 degrees, the relative humidity between 60% to 70%
5, the sample breakdown instant spark generated and accompanied by sound, is a normal phenomenon.
6, each change of specimen or in contact with the high-voltage electrode must be with high pressure put flashlight on the high voltage electrode discharge, discharge time more than 5 seconds.
7, every time before the test, must check the instrument grounding
Software function:
01, software platform: WINDOWS window operating platform, intuitive interface, easy to operate
02, the curve shows: in the experimental process can be dynamic display test curve
03, data export: the test results can be imported into the EXCEL table
04, the experimental report: you can set the name of the report, and the report of the experiment to print
05, test methods: according to the needs of the DC test and AC test for flexible selection
06, test methods: according to the demand to choose their own breakdown voltage, voltage test, gradient test
07, parameter setting: according to different test methods and test methods can be flexibly set the different parameters
08, sample setting: can be different standards of the sample parameters of flexible settings
09, personnel management: set the user name and password, different operators to log in for different tests, do not affect each other
10, the standard choice: contains different standards, according to the needs of their own choice
11, continuous operation: continuous operation of the test, can be directly in the software to end the test, the two test
Technical requirements:
01, input voltage: AC 220 V
02, output voltage: AC KV 0--50
DC 0 - 50 KV
03, electrical capacity: 3KVA
04, the breakdown of the maximum output current: 30mA 100mA (can be exchanged)
05, high pressure classification: 0--5KV; 0-10KV; 0-30KV; 0-40KV; 0-50KV, 0-50KV;
06, boost speed: 100V/S 200V/S 500V/S 10V/S 1000V/S 2500V/S 3000V/S
07, test methods:
DC test: 1, breakdown test 2, gradient boost 3, pressure test
AC test: 1, breakdown test 2, gradient boost 3, pressure test
08, breakdown and sentenced to stop: 1, voltage sentenced to stop 2, the current sentenced to stop
09, voltage test accuracy: less than 1%
10, test: 1, 2, insulation insulation test specimen immersed in test samples in air
11, specifications: 25mm brass electrode of a 75mm of two
12, the host size: length and width of about 700*800*1500 (MM)
14, protective cover material: organic glass
15, equipment weight: about 120KG
Main configuration:
1, a test host
50 thousand, 2 volts high voltage generator
3, fully automatic microcomputer voltage regulator device (serial mode)
4, test electrode specifications (Zi Tong)
5, test oil box one: material for organic glass
6, a set of electromagnetic automatic discharge device.
7, voltage breakdown computer control software set
8, a computer set (special anti interference computer)
9, color inkjet printer (HP brand)
10, the national level measurement and identification of a quality certificate
11, a copy of the instructions of the product
12, a certificate of qualification
Product features
1, running in the XP/WIN7/WIN8 WIN system under the independent installation software, friendly interface, easy to operate
2, the experiment shows the curve, the data automatic storage, automatic search
3, a variety of uses can be carried out, DC test test is accurate, reliable and safe
4, computer control test process, automatic judgment stop, automatic reset
5, over voltage, over current, short circuit, leakage, wrong operation and other protection
Operation steps:
1, preparation before the test:
1) the total power switch on the right side of the test machine, preheat for 15 minutes.
2) open the computer to enter the Windows system. Double click the shortcut icon of the instrument software to open the test login screen enter the login password to enter the test interface.
2, AC and DC test switch
1) the high voltage output of the instrument for AC voltage. The method of obtaining direct current is in series with a high voltage silicon stack in the original circuit, which causes the test loop to have a pulsating DC voltage. Implementation of the process, silicon stack has been in a high-voltage transformer high-voltage insulating column, usually with a short rod high-voltage silicon stack is shorted. When the DC test is needed, the short circuit rod is taken out, and the high-voltage silicon stack is connected with the test circuit.
2) front panel DC AC selection button. The state of the button can not change the nature of the output of the device. Press the press