PA66 70G35HSL尼龍加玻纖35%
Injection | dry / cond | Unit | Test Standard | |
Drying Recommended | yes | - | - | |
Drying Temperature | 80 | °C | - | |
Drying Time, Dehumidified Dryer | 2 - 4 | h | - | |
Processing Moisture Content | ≤0.2 | % | - | |
Melt Temperature Optimum | 295 | °C | - | |
Min. melt temperature | 285 | °C | - | |
Max. melt temperature | 305 | °C | - | |
Max. screw tangential speed | 0.2 / * | m/s | - | |
Mold Temperature Optimum | 100 | °C | - | |
Min. mold temperature | 70 | °C | - | |
Max. mold temperature | 120 | °C | - | |
Hold pressure range | 50 - 100 | MPa | - | |
Hold pressure time | 3 | s/mm | - | |
Ejection temperature | 210 | °C | - |