WZY-240*制樣機
WZY-240系列*制樣機由試樣切割部分、缺口制樣部分、啞鈴制樣部分三部分組成。試樣切割部分用于切割條形試樣、管材試樣。缺口制樣部分用于制備簡支梁、懸臂梁沖擊試驗的試樣樣條缺口。啞鈴制樣部分用于制備各種非金屬材料拉伸試驗用標準啞鈴試樣或非標準試樣。三種功能集于一身，便于實現制樣全過程。制樣主動力分別由電機驅動，帶動銑刀及鋸片旋轉切割試樣。各個方向進給用導軌進行導向，移動平穩。夾具方便靈活，適用于多種試樣的制作。為防止試樣加工發熱變形，制樣過程采用水冷卻，由水泵進行水循環。該*制樣機結構緊湊、操作方便、進給平穩、制樣迅速準確。
為安全起見本儀器操作按扭均為急停按扭，既旋轉打開按下停止。
該機分為兩種：WZY-240型 自然冷卻 WZY-240型 水冷
技術參數
1. 缺口制樣部分
缺口制樣部分主要用于制備簡支梁、懸臂梁沖擊試驗的試樣樣條缺口。該機主要技術參數符合GB/T1043-1993、GB/T1843-1996、ISO179-1993、ISO180-1993等標準要求。其結構簡單，操作方便，試樣制備快速，尺寸準確，是試樣缺口制備的理想設備。
1)、技術規格
額定功率：180W
額定電壓：220V
銑刀轉速：1400r/min
走刀行程：50mm
夾緊行程：60mm
橫向行程：40mm
提升行程：20mm
工作臺面尺寸：長×寬=500mm×380mm
試樣類型：1、2、3、4型
銑刀參數：
A型：直徑Φ63mm，45o±30'，R=0.25±0.025mm
B型：直徑Φ63mm，45o±30'，R=1.0±0.025mm
C2型：直徑Φ60mm，厚度2.0±0.1mm，R<0.1mm
C2型：直徑Φ60mm，厚度0.8±0.1mm，R<0.1mm(選購)
2. 啞鈴制樣部分
啞鈴制樣部分用于制備各種非金屬材料拉伸試驗用標準啞鈴試樣或非標準試樣。該機制備的試樣符合GB1040、GB8804.1、GB8804.2等標準。
技術規格：
電 源：AC220V±10%，600W
銑刀轉速：2820r/min
銑刀直徑：φ27mm
走刀行程：300mm
壓緊行程：25mm
工作臺面尺寸：長×寬=570mm×560mm
3. 試樣切割部分
試樣切割部分用于切割條形試樣、管材試樣。適用于各種形狀，切割快速，尺寸準確。
技術規格：
電 源：AC220V±10%，750W
工作臺面尺寸：長×寬=570mm×46
WZY-240 universal system prototype
WZY-240 series universal system prototype is composed of three parts, the sample cutting part, the notched sample part and the dumbbell sample part. The sample cutting part is used for cutting the strip sample and the tube sample. Notched sample preparation is used to prepare a simple beam and a cantilever beam impact test specimen. Dumbbell sample parts used in the preparation of a variety of non metallic materials tensile test using standard dumbbell specimen or non - standard specimen. Three kinds of functions set in one, easy to realize the process of the whole process. The driving force of the system is driven by the motor, and the cutter and the rotary cutting sample of the blade are driven by the motor. The direction of each direction of the guide, moving smoothly. The fixture is convenient and flexible, and is suitable for the production of many kinds of samples. In order to prevent the heat distortion of the sample processing, the process of water cooling, water cooling by the water pump. The universal system has compact structure, convenient operation, stable feeding, rapid and accurate sample preparation.
For the sake of safety of the equipment operation button for emergency stop button, can rotate and open the press stop.
The machine is divided into two types: WZY-240 natural cooling WZY-240 type water cooling
Technical parameters
1 part of the gap
The notched sample preparation is mainly used for the preparation of simple supported beam, cantilever beam impact testing of the specimen sample. The main technical parameters of the machine are in accordance with GB/T1043-1993, GB/T1843-1996, ISO179-1993, ISO180-1993 and other standards. Its structure is simple and easy to operate. The sample preparation is rapid and accurate. It is an ideal equipment for the sample preparation.
1), technical specifications
Rated power: 180W
Rated voltage: 220V
Milling speed: 1400r/min
Take knife stroke: 50mm
Clamping stroke: 60mm
Horizontal stroke: 40mm
Lift stroke: 20mm
Work table size: length x width =500mm x 380mm
Sample types: 1, 2, 3, 4
Milling parameters:
A type cutter: diameter 63mm, 45 degrees + 30', R=0.25 + 0.025mm
B type cutter: diameter 63mm, 45 degrees + 30', R=1.0 + 0.025mm
C2 type cutter: the diameter of 60mm, thickness of 2 + 0.1mm, R<0.1mm
C2 type cutter: the diameter of 60mm, thickness of 0.8 + 0.1mm, R<0.1mm (optional)
2 dumbbell sample parts
Dumbbell sample parts used in the preparation of a variety of non metallic materials tensile test using standard dumbbell specimen or non - standard specimen. The sample prepared by this mechanism is in accordance with GB1040, GB8804.1, GB8804.2 and other standards.
Technical specification:
Power source: AC220V 10%, 600W
Milling speed: 2820r/min
Cutter diameter: diameter of 27mm
Take knife stroke: 300mm
Pressing stroke: 25mm
Work table size: length x width =570mm x 560mm
3 cutting part
The sample cutting part is used for cutting the strip sample and the tube sample. Applies to all kinds of shapes, cutting fast, accurate size.
Technical specification:
Power source: AC220V 10%, 750W
Saw blade speed: 4000r/min
Blade diameter: diameter of 250mm
Saw blade thickness: 3mm
Saw blade cutting height: 45mm
Cutting stroke: 260mm
Work table size: length x width =570mm x 46
