涂塑復合機組主要配置
主 要 配 置 名 稱Main scheme name | 型 號 & 參 數 Type & Parameter | 數量 |
系統裝機容量 System power | 100Kw |
|
A．擠出主機 Extruding machine |
| 1 |
齒輪箱冷卻方式 Gear wheel case |
|
|
螺桿直徑 Diameter of screw | φ120mm |
|
長徑比 L/D of screw | 24:1 |
|
螺桿轉速 Speed of screw | 10-55m/min |
|
螺桿村材質 Material of screw | 38CrMoAlA氮化處理HV740-940 |
|
機筒材質 Material of screw bobbin | 38CrMoAlA氮化處理HV740-940 |
|
壓力傳感器 Hydraulic inductor |
|
|
螺桿進料式邊料組合料斗Screw inputting material style waste mixed hopper |
|
|
電氣*控制盤Electric equipments middle controlled board |
|
|
自動調溫儀Automatic adjusting temperature instrument |
|
|
加熱區域 Heated scope | 5 |
|
加熱功率 Heated power | 47Kw |
|
加熱形式 Heating style | 鑄鋁加熱圈Heating loop of casting Al |
|
zui大擠出量 Max. Volume of extruding | 100Kg/h |
|
主機電機功率Power of main engine | 37Kw |
|
B．復合裝置 Compound device |
| 1 |
硅膠輥直徑 Rubber roller | φ200mm |
|
冷卻鋼輥 Steel roller | φ400mm |
|
牽引電機功率 Tow engine power | 11Kw |
|
冷卻方式 Cooling style | 水冷Water cooling |
|
接口 Connecting place | 3/4” |
|
模頭寬度 Width of mold | 1800mm |
|
加熱區域 Heating scope | 五區 |
|
加熱形式 Heating style | 鑄鋁加熱板Heating board of casting Al |
|
主 要 配 置 名 稱Main scheme name | 型 號 & 參 數Type & Parameter | 數量 |
模頭奪厚度調節范圍Adjusting scope of mold width | 0.1-0.55mm |
|
B．切邊。打孔，廢邊吹送裝置Cutting side device |
| 1 |
切邊方式 Cutting side style | 刀片式Knife piece style |
|
風機功率Wind machine power | 1.5Kw |
|
針盤，針槽Needle check , needle trough |
|
|
打孔針規格 specification of needle | φ1.4-φ2.5mm |
|
C．裁切裝置Cutting device |
| 1 |
裁切方式Cutting style | 冷切Cold cutting |
|
zui大裁切長度Max. cutting length | 1200mm |
|
D．收卷裝置 Winding device |
| 1 |
收卷方式 Winding style | 表面卷取Surface winding |
|
收卷速度Winding style | 20-80m/min |
|
收卷輥直徑Diameter of winding bobbin | φ190mm |
|
收卷電機功率Winding power | 7.5Kw |
|
zui大卷徑. winding diameter | 1000mm |
|
E．放卷裝置Putting device |
| 1 |
工位數Working place number | 雙工位Double working place |
|
糾偏方式correcting an error style | 液壓糾偏Hydraulic pressure correcting an error |
|
F．設備外形尺寸Overall dimension t | 10000×8000×3000mm |
|
G．整機重量Weight | 8000Kg |
|
涂塑復合機組主要配置
